BMX
$10.99 - $11.99
Cornerstone Grip features a ribbed design with Cornerstone logo.
- Includes Odyssey Par Ends
$11.99
The Jake Seeley signature grips feature a gradually increasing rib width design and a tapered core for comfort.
- 160mm
$17.99
The Silencer V2 has a lightweight 6061 aluminum core supports the entire sleeve. The sleeve is made from our proprietary Thermalite material and resists cracking and deformation while sliding better than chromoly on most surfaces. The lengthy 4.4" peg ensures you maintain locked into grinds.
- Axle: 3/8" with included 10mm adapter
- Diameter: 1.6"
- Length: 4.4"
- Weight: 5.3-ounce each
- Sold individually
$5.99
Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer).
- Length: 4.4-inch
- Diameter: 1.6-inch
- Material: Plastic (Thermalite)
- Weight: 0.8- ounce each
- Replacement sleeve only
- Sold individually
$89.99
The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar.
- 41-Thermal processed 4130 chromoly
- Multi-butted
$109.99
A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability.
- Multi-Butted, traditional 7/8" crossbar for strength
- Large radius bends for greater durability
- Welded end caps to reduce flex
- Post-weld heat-treated for added strength
$13.99
As the name implies, this new version can be easily adjusted to cover 3 different lengths by utilizing the cable’s unique straddle interface connection. This tool-free feature allows the Adjustable Quik Slic Kable to be a one-size-fits-all cable for virtually every braking configuration.
FEATURES
- Adjustable hanger slot allows upper cable to rotate for optimum alignment.
- The integrated hanger and straddle cable creates direct routing to brake arms with no bends or twists to reduce flex.
- Linear K-Shield mesh housing offers higher compression rate and lighter weight than standard steel mesh.
- All Odyssey Linear cables are offered with the K-Shield housing.
- Specially designed and machined Volcano ferrules prevent premature housing blowout. Velcro strap included.
SPECS
- Housing length: 995mm
- Frame requirements: Slotted cable stop and guides. 245mm (+/-3) distance from center brake boss to the front of the cable stop is recommended.
- Brake requirements: Open-ended U-brake arms.
- Works with most brake levers.
- Velcro strap included.
$31.99 - $34.99
The Mike Aitken signature BMX seat is a stylish and durable, that's tear and scuff resistant.
$9.99 - $11.99
Broc Raiford signature grips feature a comfortable ribbed design and smooth ends for improved wear resistance.
- 160mm lenght
- Par Ends Included
$16.99 - $20.00
Odyssey Bluebird chain is the proven and reliable KMC 510-HX chain with an added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
- Proven and reliable KMC 510-HX chain
- Factory installed half-link for a radically stronger set-up
$9.99 - $22.99
- Press fit designed to work the hub's non-drive side collar.
$39.99
6061 aluminum with precision sealed mechanism bearing and lower (17mm) stack height.
$8.99
The Gost pads feature a unique design to make install and set up easier.
- Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame
- Assembly is simplified by lining up the rim and tightening a M6 female bolt
$18.99
This plastic peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve.
- 1.5-inch outer diameter
- 14mm with 3/8-inch adapter
- Sold individually
- Weight: 7.6oz
- Replacement sleeves sold separately
$5.99
The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic.
- Sold singly
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$7.99
- Lower cables for Odyssey's Gyro G3 (sold separately).
- Universal fit.
- Lower cables only.
$7.99
- Upper cables for Odyssey's Gyro G3 (sold separately)
- Universal fit.
- Upper cables only.
$22.99 - $23.00
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers.
- Sized and dimensioned specifically for BMX.
$44.99
Odyssey JC/PC Pedals are designed with replaceable pedal bodies, pins, and nuts.
- No bearings, adjustable bushing tension
- Two-piece plastic bodies with replaceable metal pins and CroMoly spindles
$54.99
A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths.
- 7075 Aluminum
$9.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz).
- Black
- 60 – 65mm
$5.99
The M2 lever works with a single cable or Odyssey's dual cable system.
- Improved braking power for Gyro users
- Left/Right hand compatible
$22.99
- 4140 Chromoly
- 3 Possible peg positions for longer peg life
- 14mm with 3/8-inch adapters included
- 4 inches (length) x 1-3/8 inches (outer diameter)
- Sold in pairs
- 8.75 oz (17.5 oz for a pair)
$27.99
The M2 lever works with a single cable or Odyssey's dual cable system.
- Includes M2 dual cable, double cable coupler and single cable coupler
- Replaceable hardware to eliminate stripping
$22.50
The Odyssey Medium Monolever is a favorite with its familiar feel, smooth edges and variety of handle options.
- Fits 7/8" bars, has a hinged bracket, and does not include cable knarps
$3.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
$26.99
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 10mm, 3mm and 2mm (15mm total)
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1-1/8 integrated headset.
- 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).
Page 1 of 2
Next page