Skip to main content

Filter By:

Full-Suspension

Liv Intrigue 29 2
$3,200.00
Built to cover ground, mow over techy singletrack, and charge down aggressive terrain, the all new Intrigue 29 prefers the rowdy side of life. Top Performance Trail Maestro Suspension, ALUXX SL-Grade Aluminum, and no-compromise finish. Balanced Agility With a versatile 125/140 mm platform and 29-inch wheels compatible with up to 2.5-inch tires, Intrigue 29 is a dream for both climbing agility and control while descending. Truly Dialed for Women The Intrigue 29 is designed around Liv’s 3F Design Philosophy combined with suspension testing conducted by women for women, and tuned to perfection. Why we love it Intrigue 29 has now arrived for those riders who fancy a fast-rolling, high-performance trail bike that can handle epic climbs and demanding descents. Our ALUXX SL-Grade aluminum frame leads the charge with women’s-specific geometry and shock tuning specifically designed for women by women. With a 29-inch tubeless Boost wheelset, you can afford to run a slightly shorter travel setup without sacrificing trail fun. Intrigue 29 offers a 140 mm suspension fork and 125mm of rear suspension on an ultra-light, torsionally stiff Advanced Forged Composite linkage. Meet all the demands of your terrain with an advanced rear flip chip, allowing you to change the geometry of the bike to be more suitable for climbing or descending, depending on your trail needs.
Liv Intrigue Advanced 2
$3,150.00
Rip through backcountry singletrack, blaze new lines and feel fearless on any terrain with the playfully agile Intrigue. Intrigue is back as a corner carving, descent dominating, composite frame that leads the charge with Liv’s 3F design and uses our Advanced Composite material. Focus on soaking up experiences instead of the bumps, with 140mm rear suspension and 150mm front suspension on an ultra-light and stiff Advanced Forge Composite linkage. 27.5-inch tubeless Boost wheels can accommodate higher volume tires, up to 2.6 inches, so you can customize your ride based off your terrain. Guided by Liv’s 3F Design Philosophy, Intrigue is fully women’s-specific, meaning it has a frame geometry, composite layup and shock tuning created for women by women. With improved pedaling efficiency and an aggressive trail riding position, including lengthened top tube and shortened stem, the Intrigue is eager to encounter edge and beyond. Intrigue is complete with sleek internal cable routing and side pull front derailleur compatibility. Top Performance Trail Maestro Suspension, Advanced Composite tuned for women, no-compromise finish. Balanced Agility With a versatile 140mm/150mm platform and 27.5-inch wheels compatible up to 2.6-inch tires, Intrigue is a dream for both climbing agility and downhill control. Truly Dialed for Women Using Liv’s 3F Design Philosophy combined with suspension testing conducted by women for women, and tuned to perfection through iterations of prototype testing with athletes. Why we love it Striking the perfect balance of the all-around-capable mountain bike, Intrigue nimbly charges through rock gardens, makes quick work of uphills, and takes a skillful stance on steep or winding descents. Intrigue is designed to expand horizons and boost every rider to her peak. This bike is a must-have for determined, dirt-driven women looking to push their riding further.
Liv Pique SX 2
$3,150.00
Fast up, fast down, Pique is the versatile XC trail bike with an affinity for speed. Gone are the days when you need to choose a bike based on whether you want to go fast uphill or downhill. With Liv’s 3F Design Philosophy, you get a lightweight frame design with souped-up power transfer for serious climbing performance. Paired with 120-mm trunnion-mounted Maestro suspension and a 140-mm fork, Pique SX offers unrivaled descending performance. 27.5-inch wheels ensure bike handling is still nimble and playful, while maintaining the stable cornering and bump-reducing qualities of a larger wheel size. Liv’s 3F Design Philosophy lets us create bikes that are specifically designed for female riders and meet the demands of cross-country and trail riding.
Kona Hei Hei Trail DL
$3,500.00
The Jack of all Trades, the Hei Hei Trail DL is the go-to machine for almost any situation. Lightweight for climbing, and with a GX Eagle drivetrain and RockShox Reverb dropper, the ups turn to fun. When the trail points down, SRAM Guide R 4-piston brakes are there when you need them.
Kona Process 134 CR 29
$5,000.00
Reliable, ready to get rowdy, and always down to go wherever you want, the Process 134 CR is like that friend you want to bring everywhere with you. Fox suspension front and rear keeps the bike smooth while that beloved Process geometry keeps the full carbon frame playful. SRAM’s updated GX Eagle drivetrain and new G2 RS brakes bring control to every ride. This year the bike is running a Maxxis Dissector 2.4” WT 3C rear tire to provide maximum traction with blistering speed. The Process 134 CR—your best friend in bike form.
Kona Process 134 CR/DL 29
$6,000.00
The Process 134 CR DL 29 represents four years of design iterations, mechanical engineering, and real-world testing. Born from the beloved Process 111, it ticks all of the longer/lower/slacker boxes while still maintaining the classic Kona feel of really freaking fun. A carbon frame features a 140mm RockShox Pike Ultimate RC2 fork up front, a RockShox Super Deluxe Ultimate rear shock, and a SRAM X01 Eagle 12-speed drivetrain. With a build this sweet, the 134 CR DL leaves nothing to be desired. - Kona Carbon frame - RockShox Pike Ultimate RC2 Charger 2 DebonAir 140mm fork - RockShox Super Deluxe Ultimate shock - SRAM XO1 Eagle 1x12 drivetrain - WTB KOM Light i30 TCS 29" on DT Swiss 370 Hubs - SRAM G2 RSC hydraulic disc brakes
Kona Process 134 CR/DL 29
$5,999.00
We launched The Process 134 CR/DL 29 last summer to dozens of accolades. “It’s so playful,” they said, and they are right. This bike brings the fun to every ride. Featuring a SRAM XO1 Eagle drivetrain with updated 10-52 cassette, brand new G2 RSC brakes, DT Swiss 350 hubs on WTB KOM Trail i30 rims all aboard our full carbon frame, the Process 134 CR DL is poised to be one of the most popular and versatile bikes we’ve ever made.
Kona Process 134 DL 29
$3,699.00
The Process 134 DL 29 proved to be one of the most popular Konas of 2020. Was it the price? The spec? A combo of the two? We’re willing to bet this bike will be the belle of the ball again. Ultra-powerful SRAM G2 RS brakes keep speed in check while a RockShox Pike Select RC Charger DebonAir fork and Deluxe Ultimate shock provides a bottomless feel. Longer droppers are now coming stock in the smaller frame sizes, and with TranzX’s new +RAD post with adjustable travel, everyone will be able to find their sweet spot. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Beamer Independent Suspension Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
Kona Remote 160
$5,999.00
The Remote 160 brings the power of an e-MTB to the masses. After a successful 2020, it’s back and better than ever. Shimano’s E7000 motor with 504 Wh battery means bigger days than ever before. Process-derived geometry provides playful handling on the descents. A 160mm RockShox Zeb Charger R Debonair fork and Super Deluxe Select rear shock provide the perfect amount of squish. E-MTB-specific SRAM Guide RE brakes with 200mm rotors slow you down when you need. Running Maxxis Minion 27.5x2.8" tires give you excellent traction over the roughest terrain. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x157mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Beamer Independent Suspension Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning. 27.5+ Wheels The benefits of the 27.5-inch wheel are simple: they roll over obstacles and track better than 26-inch wheels, but are more maneuverable and nimble than 29-inch ones.
Giant Trance Advanced 2
$3,150.00
Be ready to rock on all types of trails. From lung-busting climbs to screaming descents, this ultra-capable singletrack shredder is built on a lightweight and stiff composite frame with updated Maestro suspension that keeps you in control. Trance Advanced delivers cutting edge performance so you can climb faster and descend with more control. Featuring 140mm of rear suspension travel and 150mm up front, plus the agile all-rounder performance of 27.5 wheels, this progressive trail bike can do it all. The refined Maestro suspension system includes a trunnion mount shock and Advanced Forged composite rocker arm, which makes the whole chassis lighter and stronger. And overall frame geometry has evolved with shorter chainstays and a longer top tube for confident handling on aggressive terrain. 27.5 agility and control 27.5-inch wheels balance agility and control, giving you the ability to roll over rugged terrain, flick the bike at speed, change lines, and explode out of corners. Latest suspension tech Updated Maestro rear suspension features a trunnion mount shock with a longer stroke and smoother feel. With 140mm of rear travel (and 150mm up front), it has the new Advanced Forged Composite upper rocker arm for increased stiffness and strength plus lower overall frame weight. Trail-tuned chassis The lightweight and stiff Advanced-grade composite frameset features updated geometry to give you confidence on technical trails. The result is agile and efficient climbing plus added control for trails ranging from chunky singletrack to flowy high-speed descents.
Giant Trance X Advanced Pro 29 2
$4,500.00
Extra travel, extra fun. From rowdy enduro runs to backcountry missions on steep, chunky singletrack, this new composite 29er builds on the Trance 29 platform with beefed up suspension and adjustable frame geometry. This new member of the Trance family is designed with a longer travel suspension setup for added control on the most challenging trails. The full composite frame is engineered for 135mm of rear travel and 150mm up front. The Maestro rear suspension has a two-stage adjustable Advanced Forged Composite rocker arm with a trunnion-mount shock. The flip-chip equipped rocker arm lets you adjust frame geometry for your own riding style and terrain. To fine tune the ride, you can choose a steeper or slacker headtube angle (66.2 or 65.5 degrees) and seattube angle (77.9 or 77.2 degrees), which results in either a 30mm or 40mm bottom bracket drop. And it's all built around 29-inch wheels for added stability on rugged terrain. 29er confidence and control Optimized Maestro suspension for 29-inch wheels with 135mm rear/150mm front travel to roll over rough terrain with balance and stability, giving you more momentum for technical climbs and the confidence to fly on fast, rugged singletrack descents. Added clearance for up to 2.5-inch tires. Full Composite Construction Mainframe and rear swingarm are engineered with proprietary material featuring high-performance carbon fiber and resin. Handcrafted monocoque construction makes it lightweight, stiff and compliant. Adjustable frame geometry Flip chip lets you change the headtube and seattube angles, along with the bottom bracket height, to fine-tune the handling. You can choose the low position (65.5/77.2 head/seattube angle and 40mm BB drop) for faster, open terrain or high (66.2/77.9 head/seattube angle and 30mm drop) for slower, tighter singletrack.
Giant Anthem Advanced 29 1
$3,980.00
Fly through challenging singletrack. Crush an XC marathon. This new full-suspension 29er delivers total XC dominance. Here’s the perfect recipe for a high-performance XC dream machine. Start with a superlight Advanced-grade composite chassis featuring new geometry designed for fast-rolling 29-inch wheels, 90mm of rear suspension travel, and 100mm up front. Add the most updated Maestro suspension system, including the new Trunnion mount shock for a supple feel and improved pedaling efficiency, plus the super-light and stiff Advanced Forged Composite rocker arm. And Boost hub spacing for stiffer wheels to give you more control on technical terrain. Put it all together, and you get the all-new Anthem Advanced 29, a next-generation XC crusher that’s loaded with smooth-rolling stability and confidence for the fast, technical terrain. Features: - Advanced-grade composite mainframe with 90mm of smooth Maestro suspension - RockShox SID RL Remote 100mm-travel with Boost thru-axle - RockShox Deluxe RT trunnion mount rear shock - Giant XCR 1 29 Composite DBL WheelSystem with Maxxis IKON tubeless tires - Shimano SLX 1x11-speed drivetrain and Shimano hydraulic disc brakes
Kona Hei Hei
$2,599.00
If you’re looking for a bike that is a little bit XC and a little bit rock n’ roll, look no further than the Hei Hei. Our Race Light 6061 Aluminum frame has been perfectly designed to be fast and strong. A 120mm RockShox Revelation RC DebonAir fork keeps things controlled on the front end while a Monarch RL Solo Air rear shock provides 100mm of travel and keeps the back end in check. A Shimano SLX/Deore 12-speed drivetrain is a perfectly durable and price-friendly option to keep the Hei Hei at the forefront of the most-wanted aluminum XC steeds. Kona Race Light 6061 Aluminum Kona Race Light 7005 and 6061 are lighter, more performance-oriented fabrications of our 7005/6061 tubing. Designed to meet Kona’s discerning race specifications, Race Light 7005/6061 are custom butted to create thicker tubes at weld areas and important parts of the frame, providing incredible strength and torsional integrity to the feel of the ride. We remove wall thickness in other parts of the frameset to lighten up the bike, giving the perfect balance between quickness and stiffness. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Fuse Independent Suspension The Fuse Independent Suspension is designed to be as lightweight and efficient as possible, oriented specifically for the demands of the modern XC trail rider. Like all of our suspension platforms, the Fuse IS is designed around a single pivot with a predictable leverage ratio for a responsive, snappy feel. Built for our Hei Hei platform, the frame features a seat stay that relies on small degrees of frame flex rather than a pivot at the seat and chainstay junction. The result is an efficient, laterally stiff suspension system that takes weight savings to a new level.
Kona Hei Hei CR
$4,499.00
The Hei Hei CR marries practical and sleek to produce a workhorse of a bike. A Shimano XT/SLX 12-speed drivetrain provides reliable shifting across a broad 10-51t gear range. A Fox Float 34 SC Performance fork and DPS Evol Performance rear shock add 120mm of suspension front and rear. The Kona Race Light Carbon frame with updated geometry is the perfect base for riders whether they’re smashing lines between the tape or on their local singletrack. Kona Carbon Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability and—finally—weight stipulations that we expect from our bikes. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Fuse Independent Suspension The Fuse Independent Suspension is designed to be as lightweight and efficient as possible, oriented specifically for the demands of the modern XC trail rider. Like all of our suspension platforms, the Fuse IS is designed around a single pivot with a predictable leverage ratio for a responsive, snappy feel. Built for our Hei Hei platform, the frame features a seat stay that relies on small degrees of frame flex rather than a pivot at the seat and chainstay junction. The result is an efficient, laterally stiff suspension system that takes weight savings to a new level.
Kona Hei Hei CR/DL
$5,999.00
The Hei Hei CR DL is a bike that wins big. It’s bagged three 24-hour solo world championships under Cory Wallace. It’s won huge stage races and its bagged world records. The gorgeous Kona Race Light Carbon frame features tasty components like the RockShox Sid Luxe Ultimate 120mm fork and rear shock and a SRAM XX1 drivetrain. Ultra-powerful SRAM G2 RSC brakes give you control when you need it most. WTB KOM Light i27 TCS rims are laced to smooth-rolling DT Swiss 350 hubs. Go fast and win big with the Hei Hei CR DL. Kona Carbon Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability and—finally—weight stipulations that we expect from our bikes. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Fuse Independent Suspension The Fuse Independent Suspension is designed to be as lightweight and efficient as possible, oriented specifically for the demands of the modern XC trail rider. Like all of our suspension platforms, the Fuse IS is designed around a single pivot with a predictable leverage ratio for a responsive, snappy feel. Built for our Hei Hei platform, the frame features a seat stay that relies on small degrees of frame flex rather than a pivot at the seat and chainstay junction. The result is an efficient, laterally stiff suspension system that takes weight savings to a new level.
Kona Process 134 27.5
$2,399.00
The Process 134 27.5 is the perfect gateway to the Kona dual suspension experience for riders of any size. Running on a smooth-as-butter Shimano Deore 11-speed drivetrain, it’s a reliable climber but really comes alive on the descents. RockShox suspension front and rear keeps the ride comfy and the new TranzX +RAD adjustable dropper post allows for finding the perfect seat height with ease. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Beamer Independent Suspension Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning. 27.5"+ Wheels The benefits of the 27.5-inch wheel are simple: they roll over obstacles and track better than 26-inch wheels, but are more maneuverable and nimble than 29-inch ones.
Kona Process 153 27.5
$2,999.00
The Process 153 27.5 is synonymous with dependability. It’s a great option for someone who wants an aggressive bike but may not want a 29" wheel. An updated frame and rocker provide more progressive geometry and all-new tubing. This year smalls feature the new TranzX +RAD dropper post in 150mm, allowing for the seatpost to go lower during descending without sacrificing any height during climbing. A SRAM Eagle NX/SX drivetrain keeps shifting smooth and provides a massive range for those steep ascents. WTB ST i30 TCS rims wrapped in Maxxis rubber keep the bike tracking smoothly on any trail. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Beamer Independent Suspension Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning. 27.5"+ Wheels The benefits of the 27.5-inch wheel are simple: they roll over obstacles and track better than 26-inch wheels, but are more maneuverable and nimble than 29-inch ones.
Kona Process 153 29
$2,999.00
The Process 153 29 features an updated aluminum frame that's lighter and more beautiful than ever. We’ve updated the leverage curve to make it more progressive and give a bottomless feel. The Process 153 29 features the new TranzX +RAD dropper post with longer travel. A SRAM SX/NX drivetrain keeps the shifting smooth while Guide T brakes provide ample stopping power. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Beamer Independent Suspension Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
Kona Process 153 DL 29
$3,699.00
The Process 153 DL 29 has been the racehorse of choice for enduro rippers all over the world. Featuring a RockShox Super Deluxe Select Plus shock and Lyrik Select RC Charger DebonAir fork, it stands up to all the hits. SRAM’s powerful G2 RS brakes put a stop to the chaos when needed. Aggressive Maxxis Assegai and Minion DHR tires wrapped around WTB KOM Trail rims keep the bike rolling fast and smooth. The new TranzX +RAD dropper provides adjustable travel, ensuring your seatpost is always the perfect height. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Beamer Independent Suspension Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
Kona Process X
$4,999.00
The Process X is coming in hot! This gravity-hungry machine features 170mm of front and 161mm of rear travel. With its full carbon frame, an adjustable wheelbase, and the ability to run a 29” or 27.5” rear wheel, the Process X can be customized to the perfect fit. A Shimano XT drivetrain keeps the shifting smooth while ultra-powerful four piston Shimano Deore brakes with 203mm rotors keep the speed in check. When you’re ready to rip, a Fox 38 Performance fork and Performance Elite DPX2 rear shock provide plush suspension. Chunky trails are no match for the front Maxxis Assegai EXO+ TR 3C and rear Minion DHR II EXO+ TR 3C tires. Kona Carbon Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability, and—finally—weight stipulations that we expect from our bikes. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Beamer Independent Suspension Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
Kona Process X DL
$6,999.00
If the Undertaker rode a mountain bike, he’d undoubtedly ride the Process X DL. Aimed at nothing but ripping riders on the most technical of terrain, the Process X DL is a monster on the trails. A full carbon frame features the all-new RockShox Zeb Ultimate RC2 fork with 170mm of travel and a RockShox Super Deluxe Ultimate rear shock boasting 161mm of travel. A SRAM XO1 Eagle drivetrain provides maximum range when hitting the liaison stages between trails. We tossed on some ultra-burly Maxxis EXO+ casing tires—Assegai front and Minion DHR II rear—for the rough stuff. SRAM Code RSC brakes provide mega stopping power, but who needs brakes when you're this busy hauling ass? Kona Carbon Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability, and—finally—weight stipulations that we expect from our bikes. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance, the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance, and weight savings over traditional tube and tire systems. 12x148mm Axle 12x142mm, 12x148, and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. Beamer Independent Suspension Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
Ibis Ripmo AF 29 Large (19
$4,300.00
Ripmo AF 19" Red w/Topaz T3/Diamond D1/GX Eagle 4 Pot 170mm/S35 Alloy Wheels/Carbon Bar/Bike Yoke 160mm/ Ibis The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks
Page 1 of 1