Racks

The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty

You'll keep on keepin' on with Planet Bike's K.O.K.O. Cargo Rack on your bike. Made of 6061 aluminum for maximum strength and stability, it boasts a wide range of adjustability so it's easy to install and fits most bicycles. There's a taillight mount, too (lights sold separately).

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Short fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is for maximum mud clearance and fits tires up to 29 x 3.25" - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2" (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

The ultimate bike rack! The Ortlieb Rack Three offers you the right solution, whether you're on your way to work, the grocery store, or around the world. One unique advantage of this all-purpose bike rack is its compatibility with all Ortlieb attachment systems. Outfitted with convenient mounting elements for the QL3 and QL3.1 systems, the Rack Three allows you to attach all Ortlieb bags directly to your bike without any other modifications. If you want to use the Rack Three exclusively for your QL2.1/2/1 bags, you can easily remove the attachment elements for the QL3.1/QL3 and thereby create even more space for your panniers. The Rack Three's double-rail design allows you to attach all bike bags with a QL2.1, QL2 or QL1 system to a top level or a lower level. Selecting the lower level gives you the option of simultaneously attaching a bike basket or a Trunk-Bag to the top of your bike rack and expanding your overall stowage space. Rack Three is suitable for bicycles with wheel sizes of 26" and 28". - City and touring aluminum rack with two mounting levels - For wheel size 26"/28" (1 size) * Width of support surface 120 mm - Compatible with all Ortlieb mounting elements (QL1, 2, 2.1, 3 or 3.1 system) - With three integrated QL3/QL3.1 mounting elements on each side - Further mounting components are not required for QL3/QL3.1 bags - Suitable for direct mounting of QL3/QL3.1 products (e.g Back-Roller Urban, Single-Bag, Office-Bag, Downtown Two, Vario, City-Biker, Commuter-Bag) - QL3/QL3.1 lock heads can be easily removed for fixing panniers with QL1, QL2 or QL2.1 system; dummy plugs for borings included - Second mounting level for simultaneous use of pannies on sides and basket or Trunk-Bag on top - Mounting for optional rear light (not included) - Maximum capacity: 30 kg/66 lbs.

The Demi Porteur Rack is a wide but compact rack that installs on your fork's mini rack mounts or via P-clamps (included). Ideal for supporting larger bar bags like an Ocean Air Docena or Ostrich F-702 or a wire basket - Aluminum construction - Platform: 26cm x 30cm - 10kg load capacity - Includes Manny Strap - Weight: 530g - Satin polish silver or Black - Made for us by the folks responsible for Tanaka Fenders. If installing to a braze-on, the braze-on needs to be about 140mm from the brake hole on the crown. If your braze-on is too low, you will need to install using P-clamps on the legs.

Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - Fits up to 29 x 3-inch tires, with room for fenders. - Front or rear mountable. - Works with all dropper posts. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability, and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55lbs when eyelet mounted. - For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black. - 960g including all hardware and extenders. - Made in Taiwan. - Lifetime warranty!

The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks). Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg. The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages. The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs. Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs.

- One size fit all frames sizes - Easier, user-friendly assembly - 13MM alloy frame - Maximum load rating of 15kg - Pannier bag compatible

- Replacement and/or additional rack for a second bicycle - Aluminum construction - Works with the BS-1 and BS-2 child carriers

• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - 800g - 55lb weight capacity

Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home or pick up a nice bouquet of flowers. For whatever the situation dictates, we offer the 8-Pack Rack. The 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudière, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware (handily housed in a reusable Surly Tool Bag), and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 160mm

Lightweight aluminum tubing, stainless steel hardware, and fully adjustable upper stays make the Pork Chop rack a durable addition to any bike. - Fits most 700c cantilever and disc brake bikes - Tubular aluminum construction, 10mm diameter - Stainless steel hardware - Fully adjustable upper mounting brackets - W-bend at bottom of rack for easy on-and-off of hook-style panniers - Platform Dimensions: 10.75 x 4.88" - Weight: 650g - Weight Limit: 40 lbs.

If your fork has inside and outside eyelets, then the DUO is your right choice. Just as the TARA, DUO tolerates extreme loads and almost all panniers. It also ­features a longitudinal hole for optimal fit and increased flexibility. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer, or by the bicycle manufacturer for mounting a carrier. There must be no crimping. - Material: 25CrMo4 - Size: 26" | 28" - Weight: 560 g | 19.8 oz - Loading Capacity: 15 kg | 33.1 lbs - Diameter: 14 / 10 mm | 0.6 / 0.4 in

Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

Luggage Cage for triple cage mounts made of strong aluminium including high quality Nylon buckle straps. MATERIAL - 6061 Aluminium DIMENSIONS - 242 x 97 mm EXTRA INFO - 6 mounting holes for flexible attachment Nylon buckle strap max. load 3 kg WEIGHT - 281 g (incl. Straps)

- 15kg carrying capacity. - Folding design allows it to fold down to size of a pizza box. - Lightweight aluminum, 13mm rails. - Can carry any side pannier with hooks that fit 13mm rails or larger. - Additional platform on top allows for an extra bag.

You'll be amazed by how much cargo you can transport with your very own Loading Dock. This attractive rear rack from Portland Design Works isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support up to 35 pounds so you can load 'er up with all the essentials. - Lightweight aluminum tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 2 lbs - Rated to 16 kgs (35 lbs)

Axiom's Transit Rack is your trusty friend when it comes to hauling gear. It's tough, it's light and it can hold panniers. Use it to commute, tour or just head to class. It handles heavy loads easily and acts a fender as well.

The most tried and tested all-round carrier updated for today’s challenges: 3D feet with perfect force absorption and integrated screw attachment. Comfortable mounting parts for mounting the stays to the frame. Including protection of tail light. If required, a spring clamp can be clicked onto the carrier. Armed for the next tour. - Material: 25CrMo4 - Weight: 780 g | 27.5 oz (28'') - Loading Capacity: 26 kg | 57.3 lbs (tested with 40 kg | 88 lbs*) - 10 mm | 0.4 in

Designed to fit two 18-packs of your favorite beer (or your lunch, laptop, groceries, etc...), this handy rear rack is ready to haul it all! Removable tie-down rails give you somewhere to strap down loose loads or pop them off to create a flat-bed rack that can handle those 3 XL pizzas you just ordered. One ride with this rack and you'll wonder how you ever managed to carry everything without it.

Our classic model—on the road around the world since 1988. This model is the basis for all of our rear carriers. CARGO has been tested and loved by its owners in tough daily routine since 30 years. CARGO is our all-round happy solution for transporting luggage on the bike. CARGO is good for your daily ride or as packhorse for your next world tour. It fits most bikes and carries most panniers. - Material: 25CrMo4 - Weight: 740 g | 26.1 oz (28'') - Loading Capacity: 26 kg (tested with 40 kg | 88 lbs) - Diameter: 10 mm | 0.4 in

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

- Front basket rack with integrated U-lock holder - Cargo net holds basket contents securely in place - Mounts to caliper hole and front axle - Adjustable fit for 26", 27.5", 29", and 700c - Heavy-duty AL6061-T6 alloy construction supports up to 55lbs - Platform area measures 12" x 14"

Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Divide Fat fits up to 26×5" or 27.5×4.6" tires. - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 5.1" x 12" (130 mm x 306 mm) - The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide Fat come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55 lbs when eyelet is mounted. For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black - Made in Taiwan - Stainless Steel mounting hardware - Lifetime warranty!

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2? (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

The Globe Front Rack bolts directly to the two mounts on the head tube to create a tough-as-nails platform for carrying whatever your heart desires. By mounting directly to the bike frame, heavy loads can be distributed with minimal effect on handling and stability. It's also compatible with the Globe Haul's front and rear pannier adapters, allowing you to carry 5+ full grocery bags. The T-channel rail material means you can bolt on additional accessories to the sides to further customize your setup. It also accepts MIK accessories, like the MIK adapter & Turbo Basket, for fast and secure installation. - Designed for frictionless compatibility with Haul ST and Haul LT. - MIK accessory-compatible. - T-channel rail construction. - 20kg (44lb) load capacity. 30cm length, 32cm width - Installation requires tools (not included).

Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.