Parts & Accessories

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g

Integrated stainless steel storage bracket that fits under a bottle cage. Holds included Twin Speed Drive CO2 head, V5 multi tool, two CO2 cartridges and two Matrix levers. Not available with CO2 cartridges in all countries. Weight: 95g /311g Loaded

Straight bite valve for Leatt hydration systems.

Staying hydrated is basic safety! Mental and physical performance drops quickly when you run out of liquids. Stay hydrated and stay fast with this hands-free hydration kit.

- Customize your race belt with this lightweight slide on accessory - Holds up to four gel packs - Compatible with all Ergo & Ultralight Belts

- Customize your race belt with our removable micro race locks with quick release clasp - Fully adjustable race bib toggles - Hi-viz reflective accents - Compatible with all Ergo & Ultralight Belts

Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages. Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)

Deuter's Streamer 3.0 Reservoir is a great upgrade for any hydration system, and a step up from yucky, plastic-like reservoirs. The secret is the special lining that is anti-microbial and taste-free allowing you to keep water in the reservoir for days without fouling the taste. And, the 90-degree bite valve provides easy access, a cover to keep dirt off and excellent flow with a manual shut off that doesn't leak.

Engineered in collaboration with Hydrapak, the Replacement Blaster Bite Valve is designed for use with the Hydrapak Reservoir, while compatible with most hydration-pack reservoirs. The twist-on-and-off valve is intuitive for ease of use while riding. - Limited Lifetime Warranty - Hydrapak Blaster bite valve - Highest water flow on the market - Twist on/off valve - Easy disassembly for cleaning

A 2-Liter Lumbar Reservoir For Your Hydration Pack Update or replace your lumbar reservoir. This 2-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 70-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking. - Limited Lifetime Warranty - Dakine x Hydrapak design - Low-profile Shape-Loc center baffle - Plug-N-Play quick tube connector - Wide-mouth opening allows for easy fill & cleaning - High-flow Blaster valve w/shut-off - BPA- and PVC-free, FDA-approved Polyurethane (TPU) material - Lifetime warranty

The Dakine 2L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.

Update or replace your lumbar reservoir. This 3-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 100-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking.

The Dakine 3L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.

A Generously-Sized Cooler Bag for Sharing With Friends Be the only one to show up with an ice-cold six pack. This roomy, insulated cooler bag has plenty of space for your lunch or your favorite beverages. It has a water-resistant snack pocket inside and comes with an insulated koozie. An adjustable strap lets you sling it over your shoulder or wear it across your body when it's a longer haul to the party. - Dimensions: 427 cubic inches (7L); 9.5 x 6.5 x 8"

Dakine Party Bucket The Party Bucket takes its design cues from the masonry tool carriers used by DIY skatepark builders. Our ode to the working man and woman features an insulated main compartment with a mesh bottom that transforms into a cooler with the addition of a 5-gallon bucket. The Party Bucket is surrounded by eight koozies plus a large insulated wine bottle pocket, and it's topped off with a zippered water resistant interior top pocket for snacks or party essentials. Drop the tailgate and chill—you earned it.

Dakine Party Block Bag We're bringing the party to the people. The Party Block Bag has plenty of room for up to 18 cans, or a 12 pack and some ice. It's burly, with 1" foam insulation and designed with a wide stance to resist tipping over. The 4 koozies attach to the outside of the cooler to keep your beverage upright, or they can attach to the removable carrying strap, turning it into a hands-free hydration belt. And the waterproof interior is fully welded, so all that ice doesn't become a puddle in your backseat on the way home from the beach or mountain. - Limited Lifetime Warranty - Price varies by fabric - Fits up to 18 cans - 1"-thick closed-cell foam insulation - Water-resistant YKK PU-coated zipper - Padded shoulder strap converts into Party belt - Includes four attachable insulated koozies - Internal water-resistant snack pocket - Built-in bottle opener - Dimensions: 915 cubic inches (15L); 15 x 12 x 15"

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo