Filter By:
- Bikes (3)
- Parts (3)
- Accessories (4)
- Show More Sizes
- Show Fewer Sizes
Your Search: "ibis"
$3,699.00 - $11,699.00
RIPMO: Shred and climb.
What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2S. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides.
$3,499.00 - $11,499.00
The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29” trail bike.
Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra efficient dw-link travel, means it’s equally happy popping off bonus lines as it is crushing all day epics.
$2,699.00 - $4,899.00
The Hakka MX is our answer to the Swiss Army Knife.
LIGHTWEIGHT
With its ultra-versatile geometry and 1000g frame weight, the Hakka MX is just as happy crushing the local club ride as is it is jumpng barriers or camping out.
VERSATILE
It's good to have options. With the Hakka MX, you can run road, cross, and gravel-friendly 700c wheels, or, if you are into burlier backcountry exploration, go with 27.5/650B. With the Hakka MX, you don't have to pick one tire option or the other. Our subtle sculpted chainstays give the frame clearance for up to 700 x 40c or 27.5 x 2.1" tires.
CABLE ROUTING OPTIONS GALORE
No matter what drivetrain you prefer, 1x, electronic, or 2x, the Hakka MX has you covered. The frame has internal cable routing provisions for every drivetrain on the market, plus a dropper post. We've even included a slick Di2 battery mount inside the downtube.
BOTTOM BRACKET
We've tried every bottom bracket under the sun and in the end, we haven't found anything that's more reliable than a threaded BB. Our Hakka features the T47 BB standard, which uses 30mm bearings, enabling you to use the recent crop of lightweight cranksets. This is the best way to combine a threaded BB with 30mm spindle compatibility. It's lightweight, quiet, and durable, because no one likes a creaky bike.
DISC BRAKES & FENDER MOUNTS
The Hakka MX has flat-mount disc mounts and fits a 160mm rotor. The ENVE G Series Gravel fork has fender eyelets, internal cable routing, and monster clearance for 700c x 50c or 27.5 x 2.25" tires. There's also a removable rear fender mount on the seat stays.
$34.00
$46.60
27% Off
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$29.99
- Fits over ISIS spindle end, extra deep for longer spindles
- Compatible with internally splined bottom bracket cups (i.e. all Race Face ISIS, all FSA ISIS, most Shimano)
$28.00
- Fits Truvativ ISIS bottom brackets with 8-notch flanged cups (also fits crank spider nut on older X-Flow and Stylo crankarms)
- CNC machined, heat treated steel construction
- 1/2" ratchet drive and 32mm wrench flat tool interfaces
$19.95
Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)
$24.95
Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.
$36.00
- Machined aluminum replacement derailleur hangers to fit a wide variety of frames
- Please visit https://wheelsmfg.com/derailleur-hanger-tech-help for more updated info
- Made in USA + IBIS: Hakkalugi Disc 2015; Hakkalugi 2015; Silk SL 2008
- 2010
$85.00 - $95.00
Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers.
- Star-nut should be approximately 1cm from the top of the steerer tube
- Minimum 55mm of steer tube required
- Not compatible with carbon steerer tubes
- No top cap needed. Stem includes tension bolt
Page 1 of 1