Ibis Hakka MX

The Hakka MX is our answer to the Swiss Army Knife.

LIGHTWEIGHT
With its ultra-ver­sa­tile geom­e­try and 1000g frame weight, the Hak­ka MX is just as hap­py crush­ing the local club ride as is it is jump­ng bar­ri­ers or camp­ing out.

VERSATILE
It's good to have options. With the Hak­ka MX, you can run road, cross, and grav­el-friend­ly 700c wheels, or, if you are into burli­er back­coun­try explo­ration, go with 27.5/650B. With the Hak­ka MX, you don't have to pick one tire option or the oth­er. Our sub­tle sculpted ­chain­stays give the frame clear­ance for up to 700 x 40c or 27.5 x 2.1" tires.

CABLE ROUTING OPTIONS GALORE
No mat­ter what dri­ve­train you pre­fer, 1x, elec­tron­ic, or 2x, the Hak­ka MX has you cov­ered. The frame has inter­nal cable rout­ing pro­vi­sions for every dri­ve­train on the mar­ket, plus a drop­per post. We've even includ­ed a slick Di2 bat­tery mount inside the downtube.

BOTTOM BRACKET
We've tried every bot­tom brack­et under the sun and in the end, we haven't found any­thing that's more reli­able than a thread­ed BB. Our Hak­ka fea­tures the T47 BB stan­dard, which uses 30mm bear­ings, enabling you to use the recent crop of light­weight cranksets. This is the best way to com­bine a thread­ed BB with 30mm spin­dle com­pat­i­bil­i­ty. It's light­weight, qui­et, and durable, because no one likes a creaky bike.

DISC BRAKES & FENDER MOUNTS
The Hak­ka MX has flat-mount disc mounts and fits a 160mm rotor. The ENVE G Series Grav­el fork has fend­er eye­lets, inter­nal cable rout­ing, and mon­ster clear­ance for 700c x 50c or 27.5 x 2.25" tires. There's also a remov­able rear fend­er mount on the seat stays.