Gain an aerodynamic advantage with Origin-8's Tri Clip-On Aero Bars. These aluminum clip-ons fit a wide range of handlebars. With independent arm rests and bar-angle and reach adjustments, it's easy to get a great-fitting aero setup.
• Converts a cassette hub to a single speed • 8 spacers included in various sizes to adjust chain line • Anodized 6061 aluminum • Fits Shimano/SRAM cassette bodies • Conical spacers for increased cog stiffness • Includes single-speed guide, spacers, as well as 18T & 16T cogs
• 6061-T6 tubular aluminum construction • Laser etched graphics • Independent arm rest and bar adjustment • Does not include armrests • Cannot mount shifters onto ends • Clamp diameter: 25.4-31.8mm • Extension length: 105mm
- Provides enhanced chain retention for all 1x drivetrain systems - CNC-machined AL6061 alloy mount with dual-compound chain guide - Co-molded composite and TPR guide plates greatly reduce noise from chain contact - Compatible with 28-38T circular and 26-36T oval chainrings - Boost-compatible - Easily adjustable - Mounting hardware included
• Converts any multi-speed bike to a single speed • Ceramic bearing pulley wheel for reduced resistance • Mounts to frame derailleur hanger • Adjusts for perfect chain tension • Lightweight, minimalist design
Replacement pulley set with ceramic bearings. Compatible with 7,8,9, and 10-speed Campagnolo, Shimano, and SRAM drivetrains.
• Machined alloy arm • (ISCG Mount) international standard • Adjustable design • Sealed cartridge bearing • Prevents dropped chains on mountain bikes
- AL6061 alloy construction - Non-keyed design - Jar of 40 spacers
• Chain tensioner w/integrated derailleur hanger • Fits most 3/8-inch horizontal dropouts
- 3-piece expander design provides a secure fit within carbon steerer tubes - 22-25mm range of expansion - 50mm height reinforces your carbon steerer tube beneath the stem - New design evenly distributes headset compression forces - Lightweight AL6061 alloy construction - Stainless steel bolt
Origin-8's Down Tube Shifter Adapter is perfect for mounting down tube style shift levers on a bicycle that doesn't have provisions on the frame for them. It's made of light and durable machined aluminum with an anodized finish and fits frames with 1 1/8- to 1 1/4-inch diameter down tubes. Mounting hardware and shims are included.
$17.99 - $20.00
Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.
• Converts direct mount front derailleurs to clamp on • Lightweight alloy • Fits 68/73mm and 100mm bottom brackets • 34.9mm clamp
- Unidirectional carbon fiber 1-1/8" headset spacers - Sold in bags of 5
- AL6061 alloy construction - Non-keyed design - Jar of 20 spacers
- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts
- AL6061-T6 alloy seatpost clamp with an integrated adjustable cable guide - Ideal for routing brake and dropper post cables and housing - Chamfered edges and ovalized hole design protects carbon frames and seatposts - 31.8mm for 27.2mm seat posts and 34.9mm for 31.6mm seat posts - 16mm height
Seatpost clamp with integrated cover prevents dirt and mud from entering the frame at the seatpost junction - Chamfered edges and ovalized hole design protects carbon frames and seatposts - AL6061-T6 alloy clamp with NBR cover - 31.8mm for 27.2mm seat posts and 34.9mm for 31.6mm seat posts - 16mm height
Replacement brake hoods for Origin8 Pro Force road levers
- AL6061 alloy construction - Non-keyed design - Jar of 10 spacers
- Push-in replacement CNC alloy bar end plugs - MTB-specific design - Anodized alloy end caps - Compatible with most handlebar styles - 20mm OD plug/25mm OD end cap (Road) - 20mm OD plug/30mm OD end cap (MT
- Push-in replacement CNC alloy bar end plugs - MTB-specific design - Anodized alloy end caps - Compatible with most handlebar styles - 20mm OD plug/25mm OD end cap (Road) - 20mm OD plug/30mm OD end cap (MTB)
• Converts Braze-on front Derailleurs to clamp on • Lightweight forged alloy • Weight: 28g
$3.99 - $11.99
Connecting links for Origin8 chains
Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.
This is a bottom bracket adapter that works in conjuction with Origin8 Revolvr BB86/92 Thread-Together bottom brackets to create a PF121 Thread-Together bottom bracket. - Cup Material: AL6061
• Emergency universal replacement derailleur hanger • CNC machined aluminum construction • Anodized and laser etched finish
Origin-8's Grip N Seal QR Seat Clamp is forged from light and durable aluminum and features a rubber weather seal and an anodized finish to prevent corrosion. Its high-leverage quick-release lever makes it easy to raise/lower your seat.
Is your seat post just a hair too small for your frame? Origin-8's Multi-Fit Seat Post Shim is a great solution. • Multi-Fit • Aluminum • 25.4mm internal diameter • 28.0mm outer diameter
Origin-8's Braze-On Cable Stop with adjuster allows you to convert to STI style shifters. They mount onto down tube Braze-on bosses and are machined alloy with an anodized finish. The lightweight design lets you make the conversion without adding too much extra weight. One pair per package.
Page 1 of 2 Next page