- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs
$17.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
- Slides over upper fork legs to prevent frame/fork contact - Works on 35mm boXXers only
• High-tensile steel construction • Threadless
$50.00 - $69.59
• Caliper brake mounts • 385mm axle-to-crown • Chromoly construction • 1-inch steerer diameter • Threaded fork
• Upgrade from crown adjust to remote adjust • Includes PopLoc remote lever (left) and compression damper • Available for Recon Silver, Sektor Silver, XC 32, and Paragon
- Forged dropouts with eyelets, straight-gauge oval tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - 85mm threaded section - Fits up to 30c tires - Axle to Crown Length: 382 mm - Brake Mount (Fork): Long Reach Caliper (55mm - 73mm) - Crown Race: 27 - Front Axle: 9mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill - Steerer Type: Straight - Weight: 839g, 876g, 907g - Wheel Size: 27"
Dimension Road Forks are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets, welded unicrown construction - Designed for short-reach caliper brakes - 25 x 14mm tapered oval blades - Axle to Crown Length: 374mm - Brake Mount (Fork): Short Reach Caliper (39mm-49mm) - Crown Race: 26 - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill - Steerer Tube Length (mm): 170 - Steerer Type: Straight - Weight: 692g - Wheel Size: 700c
Dimension Rigid Mountain Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets - Chromoly tubing - Cantilever mounts only (no disc mount) - Axle to Crown Length: 395mm - Brake Mount (Fork): Canti Studs - Crown Race: 30 - Front Axle: 10mm x 100mm - Maximum Tire Clearance (Fork): 3.8 - Offset: 45mm - S.H.I.S. Stem Clamp Diameter: 25.4 - Steer Tube length: 260mm - Steerer Type: Straight - Weight: 1000g - Wheel Size: 26-inch
700c Hybrid fork with Cantilever Mounts - Forged dropouts with eyelets, straight-gauge oval-tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - Welded unicrown construction - Clearance for 50mm wide fenders (1 1/8-inch) - Axle to Crown Length: 403mm (1 1/8-inch); 412mm (1 1/8-inch SC); 403mm (1-inch) - Brake Mount (Fork): Canti Studs - Color: Black - Crown Race: 30 (1 1/8-inch, 1 1/8-inch SC); 26 (1-inch) - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50 mm - S.H.I.S. Stem Clamp Diameter: 28.6 (1 1/8-inch, 1 1/8-inch SC); 25.4 (1-inch) - Steerer Tube Length: 300mm (1 1/8-inch); 260mm (1 1/8-inch SC); 300mm (1-inch) - Steerer Type: Straight - Weight: 975g (1 1/8-inch); 1105g (1 1/8-inch SC); 963g (1-inch) - Wheel Size: 700c
Dimension Road Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets, welded unicrown construction - Designed for short-reach caliper brakes - 25 x 14mm tapered oval blades - Axle to Crown Length: 374mm - Brake Mount (Fork): Short Reach Caliper (39mm-49mm) - Color: Black - Crown Race: 30 - Defined Color: Black - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300 - Steerer Type: Straight - Weight: 773g (1-inch); 780g (1 1/8-inch) - Wheel Size: 700c
- Replacement damper kits
The beautiful Big Block track fork is now available in 1-inch and 1-1/8-inch sizes. Lugged crown, matching tips, straight blades, and looks that will make your heart melt. It’s the perfect replacement fork for nearly any track bike. - Material: Full 4130 High Quality Chromoly tapered fork blades, lugged crown, and matching dropouts - Axle to Crown Measurement: 375mm - Offset: 32mm - Steerer Tube Length: 300mm - Spacing: 100mm - Tire Clearance: 32c - Brakes: Mid Reach
From the pavement to the gravel, Origin-8's Cromo-Lite Disc Road Fork is made to explore. Crafted from super tough 4130 cromoly, it provides a comfortable ride with room for 28c tires for added control. And, it features mounts for disc or caliper brakes so you can ride your way.
This beaut here was designed alongside our Midnight Special Frame. In an effort to shed a few grams (it's for a road bike after all), we opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice—don't you think? Now, we don't throw the phrase "future-proof" around lightly, so we won't use it here either. What we will say is that, like the Midnight Special Frame, this fork is equipped with modern road standards like flat mount disc brakes and a 100mm x 12mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - Axle-to-crown: 400mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 27.5" x 2.32" or 700c x 42mm (27.5 x 1.95" or 700c x 38mm w/fenders) - Weight: 1254g
Origin-8's Cromo-Lite Combo Mountain Fork is seriously versatile. This 4130 chromoly steel fork can be used with 26- or 29-inch wheels, and is suspension corrected for a 100mm 26-inch-wheel fork. With disc mounts and linear-pull brake bosses, even your brake choices are versatile.
Origin-8's Cromo-Lite Combo Mountain Fork is a versatile fork for your 26-inch wheeled bike. Crafted from 4130 chromoly steel, it provides a compliant ride that's suspension corrected for excellent handling. With disc mounts and linear-pull brake bosses, you're set to mount the brakes you want.
Looking to go rigid? Then check out Salsa's 80mm suspension-corrected CroMoto Grande mountain bike fork. This chromoly beauty boasts ISO disc tabs for premium braking and it's 1-1/8" straight steerer lets you use it on older frames, or brand-spanking-new ones. It features Salsa's famous, forward-facing stainless steel fork ends and has room for tires up to 90mm wide. Plus, it comes with fender eyelets so you can stay clean even when it's sloppy out. - Salsa Classico CroMoly - Forward-facing, stainless steel dropouts - 1-1/8? threadless steerer (260mm) - 468mm axle-to-crown - 45mm rake - ISO disc tabs - Tire clearance = 90mm - Fender eyelets -1080g with full-length steerer tube
The Bridge Club fork is designed around the 27.5 wheel size with tire clearance up to 2.8, but is also capable of running 700c wheel setups with max tire clearance of 47c. It has 51mm I.S. disc caliper mounts and brake line guides as well. It only has the barnacles that matter most to the discerning bike tourist. The fork features upper and lower barrel bosses, one three pack mount on each leg, mid-blade eyelets, and rack mounts on the fork ends. - Axle-to-crown: 420mm - Offset: 43 - Steerer: 340mm - Tire Clearance: 71mm (2.8") - Weight: 1190g (2.62 lbs)
Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm - Tire Clearance: 700c x 45mm - Weight: 2.3 lb (1.0kg) uncut
The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8" straight - Tire Clearance: 29 x 3.0" - Weight: 3.1 lb (1.4kg) uncut
Designed for Surly's Krampus frame, this fork has quick-release dropouts spaced at 100mm and clearance for a 3-inch tire on a 50mm rim. To accommodate such big tires it's got a longer axle-to-crown measurement than the Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3" - Weight: 1133g uncut
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut
Surly's Moonlander Fork has clearance for a 26 x 4.7-inch wide tire. It accepts specialty front hubs with a rear disc offset or 135mm rear hubs. It takes a front disc-brake adapter so you can run any brakes that come in a traditional front/rear set without having to break up a set. This fork features large-diameter, thin-wall chromoly blades that taper for a smooth and supple ride. And, it's got standard and low-rider rack mounts and comes in a tough powdercoat finish because it's awesome.
The Ogre fork is non-suspension corrected and will run 29-inch as well as 27.5-inch tire options. Made of 4130 CroMoly, it's got 51mm IS disc mounts, removable cantilever pivots, brake-line guides, low-blade threaded barrel bosses and mid-blade eyelets for a rack. This fork is designed to run disc brakes, fenders and a rack simultaneously. It's got two sets of triple bottle mounts, one on each leg. - Axle to Crown Length: 447 mm - Brake Mount: Canti studs, IS Disc Brake 160 - Crown Race: 30 - Front Axle: 9mm x 100mm - Material: Chromoly Steel - Offset: 43 mm - Steerer Type: Straight 1-1/8-inch - Wheel Size: 29-inch, 27.5+ - Powdercoat finish
Surly's Steamroller Fork pairs great handling with urban utility. It has steep track geometry for lightening fast response, making it as at home on the velodrome as it is flying downtown with cars and pedestrians. It features a flat crown, drilled to accept a standard-reach caliper brake, and the use of wide 38mm tires. And its stealthy Black powdercoat means your opponents in the Pursuit race will never see you coming!
The Troll Fork is just like the one that comes with the Troll frame, a 26-inch wheeled fully geared utility bruiser and cruiser. Like all Surly's forks, it's constructed of CroMoly steel. It sports removable rim brake pivots as well as a 51mm disc caliper mount. The Troll Fork is designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade, and it's even got fender eyelets. - Disc or rim brake compatible - Compatible with disc brakes and rack simultaneously - Fits 26-inch wheels with clearance for a 3.0-inch tire - Steerer Type: Straight 1-1/8-inch - Sleek powdercoat finish
$134.99 - $154.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
Page 1 of 6 Next page