Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Derailleurs

Shimano Deore XT Shadow + Rear Derailleur (Long Cage)
$100.00
Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. Plus-type derailleurs use a lever-actuated clutch spring to prevent chain slap, reduce noise while on the trail, and improve chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.
SRAM X4 7-/8-Speed Rear Derailleur
$30.00
SRAM's X4 Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum and steel construction delivers through the roughest trail, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.
SRAM X9 9-speed Front Derailleur (Low-clamp, Bottom-pull)
$46.99
SRAM's X9 Front Derailleur sports a forged-aluminum cage and a cutout design for exceptional durability with minimal weight. It provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.
SRAM GX 2x11 Front Derailleur (High-clamp, Top-pull)
$43.00
SRAM's low-profile GX 2x11 front derailleur was designed specifically for SRAM GX 2x11-speed shifting systems. When paired with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible so no terrain is off limits. • 2x11-speed • Max ring (teeth): 38-tooth • Weight: 150 grams
Shimano Deore XT Front Derailleur (Direct Mount)
$41.99 - $45.99
• Wider clearance for large wheels • Compatible with shorter chain stays • Efficient cable routing for light shift operation • Increased traction range for long-travel and active rear suspension • Model Number : FD-M8020 • Series : DEORE XT • Swing Action : Side Swing • Cassette Compatibility : 11 • Maximum Capacity : Total capacity 10T • Top Gear Teeth : 34-38T • Cable Routing : Front-Pull • Chain Line : 48.8 • Chain Stay Angle : 66-69
Campagnolo EPS Front Derailleur Nut & Washer
$17.90
- EPS specific front derailleur nut and washer
Shimano XTR Down Swing Front Derailleur Di2
$409.99
- More powerful shifting (+25% compared to M9000) - Reliable gear changes under load - Computer controlled auto trim - Optimized Di2 cage profile and gear tracking - Shimano Synchronized Shift compatible - Manual control avaiable (2nd shifter required) - System communication with rear derailleur - Advantage in all conditions - Modular mounting structure (adapters optional)
Shimano XTR FD-9100 Side Swing Front Derailleur
$121.99 - $122.99
Shimano Side Swing front derailleurs feature improved cable routing for smooth and efficient front shifting effort and increased clearance for larger tires and shorter chainstays. - Optimal front system for internal cable routing - Enhanced maneuverability with plus-sized tires - Increased shifting efficiency and light and smooth operation force - D, E, M type mounts are available - M type mount requires 34.9mm adapter
Shimano XT M8100 Side Swing Front Derailleur
$42.99 - $44.99
The Shimano Deore XT FD-M8100 front derailleur offers powerful and stable front shifting for 2 x 12 systems. - Increased traction range and no chain rub for long travel bikes - Extra wide range with front double 36-26T - Compatible with 2.3-inch tire on wider rims - Drivetrain Speeds: 12 - Front Der/Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Front Pull - Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") , 28.6 (1-1/8") - Front Derailleur Style: Side Swing - Max Ring (teeth): 38
Microshift XLE Front Derailleur
$24.99 - $29.99
XLE front derailleurs deliver seamless compatibility with Shimano mountain systems, allowing you to repair or upgrade at an attractive price.
Shimano Deore XT Front Derailleur (E-Type)
$41.99 - $45.99
• Wider clearance for large wheels • Compatible with shorter chain stays • Efficient cable routing for light shift operation • Increased traction range for long-travel and active rear suspension • Model Number : FD-M8020 • Series : DEORE XT • Swing Action : Side Swing • Cassette Compatibility : 11 • Maximum Capacity : Total capacity 10T • Top Gear Teeth : 34-38T • Cable Routing : Front-Pull • Chain Line : 48.8 • Chain Stay Angle : 66-69 • BB Mounting Plate : E-Type
Shimano XTR RD-M9100 Rear Derailleur
$257.00
The RD-M9100 XTR rear derailleur is intended for use with 1x drivetrains. It is compatible with both 11- and 12-speed cassettes. - Decreased rear derailleur tension at low gear position, to prevent high chain tension - Added bumper at rear derailleur pulley cage - Bigger 13T pulley - Direct mount compatible - Compatible cassette size: 10-45 / 10-51 (12-speed), 10-45 (11-speed) - Total capacity: 35t (GS Medium Cage) / 41t (SGS Long Cage)
Shimano Deore M6020 Double Front Derailleur
$40.99
Features: - Smooth shifting and less cadence shock - Close step (10T) - SIDE SWING construction - Efficient cable routing - OPTISLICK cable - Stable performance on suspension bikes - Shifts properly while rear suspension handles rough trails and obstacles - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - 2x10-speed
K-Edge K-EDGE 1x Mountain Chain Guide
$99.99
K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions. - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
SRAM Force eTap AXS Rear Derailleur
$490.00
One rear derailleur to rule them all. The SRAM Force eTap AXS rear derailleur is designed for both 1x and 2x systems. It capitalizes on X-Range gearing technology for enhanced range and chain management and features larger pulleys for improved durability and efficiency. Strong, smooth, quiet and AXS enabled. - SRAM AXS enabled, allowing easy personalization - Orbit chain management technology keeps the drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Larger X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries
Shimano Tourney TY-300 Rear Derailleur, Rivet Mount
$15.00
Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t
K-Edge Pro Braze-on Chain Catcher with SRM Magnet
$59.99
Same specs as the K13-002 Pro Braze-on Chain Catcher but includes a Cadence Magnet required for SRM Power Meters, as well as other leading power meter brands. - CNC Machined 6061-T6 Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamps - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
SRAM X5 2x10 Front Derailleur (High-clamp, Bottom-pull)
$33.00
SRAM's X5 2x10 Front Derailleur is made from chrome-plated steel with a forged aluminum clamp for strength and precision. It provides crisp action for fast, smooth, and reliable shifting season in and season out.
Shimano Sora Double Front Derailleur
$30.99
- Model Number: FD-R3000 - Series: SORA - Top Gear Teeth: 46-52T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Models: Braze-on and band clamp available - Band clamp model includes shims for 31.8/28.6mm seat tubes
Shimano Claris FD-R2000 Front Derailleur
$23.99
Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.
SRAM GX 2x10 Front Derailleur (Low Direct-mount, Dual-pull)
$35.00
SRAM's low-profile GX 2x10 Front Derailleur was designed specifically around SRAM X-GLIDE shifting. This stiff, strong front derailleur provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.
SRAM Apex Clamp-On Front Derailleur
$48.00
For smooth downshifts and fast upshifts, SRAM's Apex Front Derailleur is engineered for success. Its aluminum body is light as a feather while its steel cage is stiff for precision shifts everytime. The Apex Front Derailleur shifts great on standard and compact cranksets, too.
Shimano Deore M6000 Triple Front Derailleur
$38.99 - $40.99
Shimano's Deore Front Derailleur delivers smooth shifting and less cadence shock along with top-notch durability. Made for triple-ring set ups, it's 10-speed compatible. You'll get stable performance, even with full suspension MTB, as it shifts properly while the rear suspension handles rough trails and obstacles. - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - Close step (10T) - Efficient cable routing - OPTISLICK cable - Swing Action: side swing - Top Gear Teeth: 40-42T - Chain Line: 50 - Chain Stay Angle: 66-69
SRAM X01 Eagle AXS Rear Derailleur
$700.00
It's an all-new derailleur that's specifically designed and optimized to be motor-driven instead of cable-actuated. AXS powered components enable customization and scale to an individual rider's liking via the AXS App. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. The Eagle AXS derailleur is smart enough to protect itself thanks to its incredibly resilient Overload Clutch. In the event of an impact, the motor gearbox disengages, giving the derailleur freedom to move, and instantly returns back to its position for a seamless experience for the rider. The system is tested to IP69K water and dust proofing standard for creek crossings, mud splatterings and the resulting post-ride pressure washings. - Enduro focus and trail ready - Forged aluminum cage - Stainless hardware - Black/Polar colorways - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available.
Shimano Deore M6000 Shadow+ Rear Derailleur
$86.99 - $87.00
Shimano's Deore Shadow+ Rear Derailleur is loaded with mountain bike technology. The Shadow design tucks the rear derailleur closer in to the wheel, reducing damage from rocks, roots, and trail obstacles. When it comes to gear changes, Shimano's Dyna-Sys supplies consistent, smooth shifting across the entire cassette. And the Shadow+ clutch maximizes chain control by virtually eliminating chain slap and excess noise with its integrated cage-tensioning clutch. - Medium Cage (for 2x10 drivetrains) - Long Cage (for 3x10 drivetrains) - For use with Shimano 10-speed drivetrains - High-efficiency drivetrain for aggressive trail riding - Optimized gear combinations and ratios for trail riding - Maximum chain wrap capacity: 41T (medium cage)/43T (long cage) - Largest cog: 42T (medium cage)/36T (long cage) - Compatible with wide range cassette - Silent and stable for technical trail riding - Improved stability and chain retention longevity - Light shifting effort - OPTISLICK cable - Smooth and precise shifting - DYNA-SYS compatible system
SRAM X01 Type 2.1 Rear Derailleur
$214.00 - $277.00
SRAM's X01 Rear Derailleur packs a massive amount of technology into its compact, lightweight body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
SRAM RED Front Derailleur
$115.00
The SRAM RED front derailleur, thanks to Yaw technology, changes everything, eliminating the need for shifter trim. Instead of simply moving back and forth, the derailleur cage actually rotates to maintain a consistent angular relationship with the chain. As a result, shifts feel more direct and precise. Combined with the SRAM RED crankset and X-GlideR chainrings, it delivers an unmatched performance advantage in front shifting. - SRAM Road 11-speed compatible - Yaw Technology - Slim spring design eliminates frame interference - Optimized for shifting with X-GlideR chainrings - Precision install markings - Integrated chain spotter protects your frame without adding any extra clunk and adjusts independently of the derailleur itself - Speeds: 2x11 - Material: Aluminum outer cage, Tool steel inner cage, Composite tail - Weight: 69g (braze-on), Chain spotter: 10.2 grams - Outer Cage: Aluminum - Compatibility: SRAM RED 22 & Force 22 Front Shift-Brake levers & X-GlideR Chainrings, SRAM R2C Aero SL-1190 shifters, SRAM R2C Aero SL-1150 shifters, SRAM 900 Aero brake levers, SRAM 500 Aero brake levers - Inner Cage: Tool steel
Shimano Tiagra Front Derailleur
$42.99
Sleek, balanced and consistent. Shimano's Tiagra 4700 series front derailleur provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: FD-4700 - Series: Tiagra - Cassette Compatibility: 10-speed - Top Gear Teeth: 53T - Maximum Capacity: 16T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Band Mount: 28.6 / 31.8 (w/AdapterS) 34.9
SRAM GX 2x11 Front Derailleur (Low Direct-mount, Bottom-pull)
$39.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically around SRAM's 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible, so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
Campagnolo EPS Front Derailleur Stiffener
$85.00
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Shimano 105 FD-R7000 Front Derailleur
$39.99 - $43.00
The Shimano FD-R7000 11-speed front derailleur offers lighter front shifting with a natural stroke feel. The derailleur's cage design is optimized to perform with disc brake road bikes, while multiple cable routing options and integrated cable tension adjustment allow for precise setup and easy adjustments. As part of Shimano's 105 R7000 series, this front derailleur is ideal for beginner road cyclists, combining great value with trickle-down technology from Shimano's top-tier groups. - Cage is optimized for disc brake road bikes - Integrated cable tension adjustment for precise and easy adjustments - More frame cable routing options
Third Eye Chainwatcher
$9.99
- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
SRAM XX1 Eagle AXS Rear Derailleur
$700.00
More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately
Shimano XT M8100 Rear Derailleur for 1x Drivetrains
$115.00
The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 1x12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount, 10x1 Standard - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 41 teeth - Largest Cog: 51 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain
SRAM X1 Type 2.1 Rear Derailleur
$220.00
Eleven speeds to rule all the trails. That is the X1 Rear Derailleur's motto. It packs a massive amount of technology into its compact, lightweight aluminum body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
SRAM X5 10-Speed Rear Derailleur
$51.00
SRAM's X5 10-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.
SRAM APEX 1 Long Cage Rear Derailleur
$76.00
SRAM’s Apex 1 drivetrain provides the gear range and the shifting simplicity to let you simply go where you want. The Apex 1 rear derailleur makes that gearing choice a reality with clean, crisp shifts, thanks to SRAM’s X-Horizon geometry and their Roller Bearing Clutch. - X-Horizon design reduces shift force, eliminates ghost shifting and chain slap - Compatible with 10-speed and 11-speed SRAM 1x road systems - With Cage Lock technology, wheel removal and installation are easier than ever - Equipped with Roller Bearing Clutch - Large upper pulley offset automatically adjusts chain gap - Weight: 314 grams - Outer Cage: Steel - Compatibility: 10-speed and 11-speed SRAM 1x road systems - Inner Cage: Steel - Cage Size: Long - Max Tooth: 42t - Pulleys: Sealed cartridge bearings - Pull: Exact Actuation
SRAM GX 2x11 Rear Derailleur
$113.00
Leveraging the legendary history of SRAM shifting, the GX 2x11 rear derailleur provides incredible shifting speed and precision. X-Actuation technology eliminates slop and shifting variation while SRAM's roller bearing clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with SRAM's Cage Lock, wheel removal and installation are easier than ever. • X-Actuation for precise and dependable 11-speed performance • Focused chassis design for all conditions and usage • 10-42-tooth wide range cassette compatible
SRAM EX1 X-Horizon Rear Derailleur
$153.00
The EX1 derailleur capitalizes on the robust build and precise shifting attributes of the X-HORIZON design, to create the world’s first derailleur specifically made for E-MTBs. Engineered to handle high-torque, low-cadence shifting across the 11-48 tooth E-Block cassette, the EX1 derailleur gives E-MTB riders clean, confident shifts, so they can spend more time enjoying the ride. - Proven SRAM X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - The EX1 derailleur is purpose built for E-MTB - Speeds: 1 x 8-speed - Weight: 289 grams - Color: Black - Outer Cage: Aluminum - Inner Cage: Aluminum - Bearings: Steel - Cage Size: Medium - Max Tooth: 48
SRAM X5 9-Speed Rear Derailleur
$45.00 - $53.00
SRAM's X5 9-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.
SRAM RED Front Derailleur
$107.00
SRAM's RED Front Derailleur, utilizing Yaw Technology, delivers a monumental leap forward in front gear-changing performance. The design vastly improves front shifts by allowing the cage to rotate to better align with the chain, while also eliminating the need for a trim function. An integrated chain spotter is included, too, for seriously bumpy roads and cyclocross action. PaiRED with SRAM's new X Glide R chainrings, unmatched front shifting will be the norm on your bike.
Microshift Marvo LT Front Derailleur
$25.99
Featuring full metal construction and precisely engineered linkages, Marvo level derailleurs deliver high-end performance that will last. - Full aluminum construction - Dual-pull design - 34.9mm version includes 31.8mm adapter
Shimano Ultegra R8050 Di2 Shadow Rear Derailleur
$265.00 - $275.00
Shimano Ultegra Di2 Shadow rear derailleur. - Sleek integrated appearance - New low-profile design - Shimano Shadow RD - Race endurance - Optimized slant angle - Maintain race concentration with more intuitive shift control - System communication with front derailleur - Shimano Synchronized Shift - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Average Weight: 242 grams (SS type), 249 grams (GS type)
SRAM GX 2x10 Front Derailleur (High Direct-mount, Top-pull)
$35.00
SRAM's low-profile GX 2x10 Front Derailleur was designed specifically around SRAM X-GLIDE shifting. This stiff, strong front derailleur provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.
SRAM Force 1 Rear Derailleur
$214.00 - $225.00
The SRAM Force 1 rear derailleur adopts all the technologies of SRAM 1x MTB to provide the fastest, quietest 1x shifting available. SRAM’s unique clutch system eliminates chain slack, providing for smoother, quieter, and more secure chain travel. - A dedicated 1x rear derailleur - EXACT ACTUATION for fast and accurate shifts using SRAM’s 1:1 actuation ratio (shifter cable travel: derailleur movement). - 10- and 11-speed compatible - X-SYNC pulley features a 12-tooth design that helps control the chain’s lateral movement - X-HORIZON “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - ROLLER BEARING CLUTCH’s one-way roller clutch controls chain tension for consistent shifting - Cage Lock technology makes for fast wheel changes or chain installation - Available in Short: 11-26 through 11-28 / Medium: 11-26 through 11-36 / Long 11-32 through 10-42 cage lengths Short Cage: Chain Wrap Capacity (teeth): 18 teeth Largest Cog: 28 Weight: 250 g Medium Cage: Chain Wrap Capacity (teeth): 26 teeth Largest Cog: 36 Weight: 262 g Long Cage: Chain Wrap Capacity (teeth): 32 teeth Largest Cog: 42 Weight: 271 g
Shimano Deore XT Rear Derailleur
$91.00 - $100.00
• 11-speed DynaSys compatible • Light Shift Operation With 20% Less Effort • Improved chain stability • Efficient Shifting And Smoother Driving • New Shadow Design With Optimized Slant Angle • New Shift Cable With New Hyper Low-Friction Coating Technology • New Shadow Design With Optimized Slant Angle For Stable Gear Position • Easy-To-Adjust Chain Stabilizer • Efficient Pulley Teeth Design • Direct Mount compatible
Shimano Claris FD-R2030 Front Derailleur
$25.00
Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.
SRAM XX1 Eagle Rear Derailleur
$300.00
Occupying a new realm in shifting performance, the redesigned XX1 Eagle derailleur gives no-compromise racers and dream-bike builders a true top-tier option. The crisp, precise XX1 shifting feel athletes rely on now features an updated cage geometry for improved chain management. Occupying its rightful place at the top of the Eagle ecosystem, the XX1 Eagle rear derailleur makes full use of the new 10-52T cassettes and is backward-compatible with 10-50T cassettes, as well. - Updated cage geometry provides better chain retention and crisper shifting - Comes in XX1 Eagle master colorway as part of Eagle Colorsystem to go with all cassette and chain color options - Backward-compatible with 10-50T cassettes, works with new 10-52T cassettes
Shimano 105 RD-R7000 Rear Derailleur
$52.99 - $58.00
Shimano 105 7000-series components offer much of the same technology and functionality as their top-level 11-speed drivetrains at a more budget-friendly price point. The RD-R7000 rear derailleur provides stable shifting performance and wide-range compatibility in two different cage lengths. The Shadow RD design limits the amount the derailleur sticks out from the side of the bike, reducing the risk of it making contact with objects and bending. - Maximum cog size: 30t (SS) / 34t (GS) - Total capacity: 35t (SS) / 39t (GS) - Pulleys: 11t - Chain compatibility: HG-EV 11-speed/HG-X11 - Direct mount compatible
Microshift Arsis 11 Rear Derailleur
$87.99
Arsis is the pinnacle of microSHIFT's road component line, delivering precise shifting under pressure. - Carbon outer link with stiff and precise response - Sealed bearing pulleys - Compatible with Shimano 11-speed road
Shimano SLX Side Swing Front Derailleur
$29.99
- Enhanced Stability, Maneuverability And Shifting Efficiency - New Side Swing Design For Large Wheel Bikes - Efficient Cable Routing For Light Shift Operation - Sophisticated Chain Guide For 2X11-Speed Fcw New Spike Construction Gears - Versatile Specification Compatible With Traditional Mounting Options - Wider Clearance For Large Wheels - Compatible With Shorter Chain Stays - 50% More Shifting Power (Outward) (Vs. Current Xt, Fd-M7020 Only) - Increased Traction Range For Long-Travel And Active Rear Suspension - Series: SLX - Swing Action: Side Swing - Top Gear Teeth: 34-38T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 136g - Clamp diameter: 34.9 w/included shims
Gusset Squire Chain Tensioner
$39.95
- Lightweight sprung-type chain tensioner replaces derailleur for running a 1-Speed drivetrain on a vertical dropout frame - Variable tension and position (Can be used on rigid frames or suspension frames with varying chain length) - Supplied with 2 springs to provide pull-Up or push-down function - Superlight CNC machined alloy body, pivot bolt and sealed bearing pulley - Steel no-jump guide cage
Shimano XTR Shadow Plus Rear Derailleur (Medium Cage)
$229.99
Shimano blows us away again with the XTR Shadow Plus 10-speed rear derailleur. The Shadow design is already well known and loved for its direct cable routing and low profile that greatly lessens the risk of snagging your cable on roots or tagging your derailleur on rocks. Shimano's Plus derailleur technology is a one-way clutch system that stabilizes the cage and your chain when ripping over rough terrain. Chain slap and noise is virtually eliminated and dropped chains are practically a thing of the past. Of course, it retains XTR's legendary smoothness, light action and super precise shifting. Once you ride a Plus derailleur, you'll never want to ride without it!
SRAM BlackBox Ceramic Bearing Pulleys - Mountain
$143.00
SRAM's BlackBox Ceramic Bearing Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. These fine pulleys even come with SRAM's ceramic-bearing grease in an easy-to-use 10ml syringe container (image of grease unavailable from manufacturer).
MRP Decapitator Direct Mount Cover
$29.95
- Cover up those unfinished and unused FD mounts with MRP cover plates - Offered in Decapitator version with built-in bottle opener - Alloy with matching alloy fastener, 12g - Made in Grand Junction, CO USA
Campagnolo Record EPS Braze-On Front Derailleur
$580.00
A powerful punch in a tiny package! Boasting an optimised design and driven by the highest quality motors available today, the front derailleur moves the chain precisely in all conditions, even under strain. The result is a derailing speed like nothing you've ever seen before, with the chain shifting up and down from one chainring to the next with truly astonishing speed and precision. The body is made of Monolithic carbon, while the internal and external derailleur cage is composed of an aluminum/carbon mix to maximize stiffness and minimize weight. Plus the Magnetic Hall Sensor Resolver automatically trims the front derailleur to line up with the rear. - Derailleur capacity: 16T - Double or triple: Double - Drivetrain speeds: 11 - Max Ring (teeth): 55T - Compatibility: Campagnolo electronic Record/Super Record EPS - Waterproof to 1 meter for 30 minutes (IP67 rated) - Weight: 133g
Shimano Deore XT M8050-GS Di2 Shadow Plus Rear Derailleur
$319.99
Shimano Deore XT RD-M8050 Di2 Rear Derailleur - Accurate and stable shifting in any condition - Instant response - Customized shift speed within Multi-shift - Powerful shifting - Seamless gear change even under high load - Smart and efficient gear selection with Shimano Synchro Shift - Single lever operation - Rider-programmable shift mapping - Drivetrain Speeds: 11 - Maximum Sprocket: 42T(2x11-speed)/46T(1x11-speed) - Minimum Sprocket: 11T - Front Difference: 10T - Total Capacity: 35T - Average Weight: 320 grams
Microshift T3828B Front Derailleur
$18.99
This microSHIFT dual pull trekking front derailleur is compatible with 2x8 mountain bike drivetrains, and cranks with up to a 48t large cog. - Durable metal construction - Compatible with Boost and non-Boost chainlines - 16t capacity - Drivetrain Speeds: 8 - Double or Triple: Double - Derailleur Capacity: 16 - Front Der/Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Dual - Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") - Max Ring (teeth): 48
Shimano GRX RX810 11-Speed Rear Derailleur
$112.00
With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience while delivering shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features an ON/OFF switch for the chain stabilizer. The RD-RX810 rear derailleur is compatible with road cassettes with a max cog size of 34T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Silent and uninterrupted rear shifting on rough terrain - Low cog: Max. 34T/Min. 30T - High cog: Max. 11T/Min. 11T - Total capacity: 40T - Compatible with current road Dual Control Lever - Maximum front chainring range: 17T
SRAM RED eTap Ceramic Bearing Rear Derailleur Pulleys
$150.00
SRAM's RED eTap Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. - Compatible with SRAM RED eTap derailleurs
Page 1 of 3 Next page