Cables

- Wire hook for electronic shift and brake housing - 2.5mm E-Shift + 5.0mm Brake

- Stainless steel die-pulled and polished slick gear cable for smooth, fast, accurate, and reliable shifting - SRAM/Shimano compatible head for both MTB and Road applications - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.1mm

SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

- Wet or muddy condition cable sealing solution - 4/6mm

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame

Extend housing runs using these double-ended junction end caps.

Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Connects 4mm or 5mm housing to electronic shift wire

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

- Stainless steel die-pulled and polished slick brake cable for smooth, crisp, and reliable braking - SRAM/Shimano compatible head - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.5mm

- Stainless steel die-pulled and polished slick brake cable for smooth, crisp, and reliable braking - SRAM/Shimano compatible head - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.5mm - Style: Road

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's Universal Cable Tips are crimp-on aluminum caps for finishing the ends of 1.8mm and smaller diameter cables. They prevent the cables from fraying and come in colors to add style to your ride. Choose from two color mixes in bottles of 30.

Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1

Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.

Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 x 5mm EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars

Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.

Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

DIY Kit Includes: - Housing and Shift Cable - End caps and cable tips - Compatible Shimano/SRAM Specs: - Cable Material: Galvanized - Intended Use: Road/MTB - Cables & Housing Comp: Shimano/SRAM - Housing Length: 2000mm

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

In-line cable tension adjusters - Indexed fine-tuning allows you to feel each "click" of adjustment and prevents loosening from vibration - Fits cable housing without ferrules

- Teflon-coated stainless steel inner wire - Includes cable, housing, ferrules, and cable tips - Cable length: 2100mm - Housing length: 1800mm - Use: Front or Rear - Length: 2100mm - Diameter: 1.5mm - Style: BMX/MTB

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

- Replacement cable for the Jagwire Pro Dropper kit - 0.8mm inner cable is more flexible and has lower friction than typical shift inner cables - An easy way to reduce the force required to activate a dropper post remote lever - Perfect for dropper seatposts with "stealth" cable routing and tight housing bends - Includes 2x heat-shrink shims - For use with dropper seatposts ONLY - Length: 2000mm