Brakes/Levers/Pads

· CNC machined in Barnoldswick, England · Includes mounting bolts · Adds 20mm of disc rotor diameter to dedicated IS calipers for use on post mount forks or frames (i.e a 160mm caliper would require the use of a 180mm rotor)

· CNC machined in Barnoldswick, England · Includes mounting bolts · Not compatible with Hope Mono6 or Moto Brakes

· CNC machined in Barnoldswick, England · Includes mounting bolts · Not compatible with Hope Mono6 or Moto Brakes

· CNC machined in Barnoldswick, England · Includes mounting bolts

· CNC machined in Barnoldswick, England · Includes mounting bolts

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Brass compression olive for Hope hydraulic disc brakes.

Brass hose insert for Hope hydraulic disc brakes.

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

· CNC machined in Barnoldswick, England · Includes mounting bolts

Replacement pads for Hope E4 hydraulic disc brakes.

Hope Brake Line kits · Works for front or rear · Fits All Hope Moto, Mono, Tech, Tech Evo and Mini Series Brakes · Length is 1500mm

Hope M4 4-Piston Disc Brake Pads. • Fits 07 and newer Mono M4 Brakes • Fits Tech M4 Brakes • Sintered: high-graphite compound; best for wet-weather durability • Organic: Softer compound than sintered, works better in dry conditions, but wears faster • Fits Tech and Tech Evo M4 Brakes

Hope Mono M6 Disc Brake Pads • Organic: Softer compound than sintered, works better in dry conditions, but wears faster • Sintered: high-graphite compound; best for wet-weather durability

Hope Mono Mini Disc Brake Pads. · Sintered: high-graphite compound; best for wet weather durability · Organic: Softer compound than sintered, works better in dry conditions, but wears faster · Fits Tech and Tech Evo M4 Brakes

Hope V2 Caliper Disc Brake Pads. · Fits Moto, Tech, and Tech Evo V2 Brakes · Standard Compound: softer compound than sintered; works better in dry conditions, but wears faster

Hope Race Evo M4 Disc Brakes & Levers • For trail, enduro, all-mountain or light freeride use; four 16mm piston caliper • Uses lightweight, black, polyester-reinforced line • CNC-machined in Barnoldswick, England, from AL-2014-T6 • Rotors not included • Pre-bled system uses DOT 5.1 brake fluid • One-piece 74mm post-mount calipers with pistons prevent heat transfer

Hope Race Evo M4 Disc Brakes & Levers • For trail, enduro, all-mountain or light freeride use; four 16mm piston caliper • Uses lightweight, black, polyester-reinforced line • CNC-machined in Barnoldswick, England, from AL-2014-T6 • Rotors not included • Pre-bled system uses DOT 5.1 brake fluid • One-piece 74mm post-mount calipers with pistons prevent heat transfer

Hope Disc Brake Caliper and Levers • For race, cross-country or trail use; 2-piston caliper • Uses lightweight, black, polyester-reinforced line • Titanium hardware, alloy-backed X2 pads • CNC-machined in Barnoldswick, England, from AL-2014-T6 • Rotors not included • Pre-bled system uses DOT 5.1 brake fluid • One-piece 74mm post-mount calipers with pistons prevent heat transfer • Split clamp design allows for quick adjustment and the lightweight machined alloy lever features a textured grip area • Lever reach is adjustable via an Allen key • Levers are right- or left-hand specific

Hope Disc Brake Caliper and Levers • For race, cross-country or trail use; 2-piston caliper • Uses lightweight, black, polyester-reinforced line • Titanium hardware, alloy-backed X2 pads • CNC-machined in Barnoldswick, England, from AL-2014-T6 • Rotors not included • Pre-bled system uses DOT 5.1 brake fluid • One-piece 74mm post-mount calipers with pistons prevent heat transfer • Split clamp design allows for quick adjustment and the lightweight machined alloy lever features a textured grip area • Lever reach is adjustable via an Allen key • Levers are right- or left-hand specific

Hope Direct Shifter mounts allow shifter pods to mount directly to the Tech lever clamp, freeing up handlebar space and improving ergonomics. · Sold in pairs · Contains two shifter mounting bolts and four lever clamp bolts · Shimano mount allows the use of XTR SL-M970 2006-2010, XTR SL-M980 and M980-I from 2011 to present and XT SL-M780-I 2012 · Works on Hope Race and Race Evo levers only

Replacement reservoir cap screw for Hope brakes.

Hope 5mm Standard Hose Kit with Fittings for Hope Brake

Hope Brake Line kits • Works for front or rear • Made for Hope by Goodridge • Fits most manufacturer's disc brakes • Braided stainless steel line • Hose length: 1600mm • Hose OD: 6mm • Hose ID: 2.4mm

• Rigid CNC'd one piece caliper • E4 caliper uses 4x16mm phenolic pistons to give more usable power • Tech 3 lever offers 5% more power compared to our previous lever • Ergonomic lever design to fit around other handle bar items • The Tech 3 lever is directly compatible with Shimano I-Spec shifters.

• Rigid CNC'd one piece caliper • E4 caliper uses 4x16mm phenolic pistons to give more usable power • Tech 3 lever offers 5% more power compared to our previous lever • Ergonomic lever design to fit around other handle bar items • The Tech 3 lever is directly compatible with Shimano I-Spec shifters.

• On the fly Bite Point Control and Reach adjustment • Direct compatibility with Shimano I-Spec shifter • Direct mount available for SRAM shifters • New piston dust cover design • New reservoir diaphragm design • CNC machine in Barnoldswick, England • 2014 T6 aluminum alloy • Wide angle hose connector mount • Floating or vented rotor compatible • Goodridge braided hose

• On the fly Bite Point Control and Reach adjustment • Direct compatibility with Shimano I-Spec shifter • Direct mount available for SRAM shifters • New piston dust cover design • New reservoir diaphragm design • CNC machine in Barnoldswick, England • 2014 T6 aluminum alloy • Wide angle hose connector mount • Floating or vented rotor compatible • Goodridge braided hose

• Rigid CNC'd one piece caliper • Increased piston diameter • Tech 3 lever offers 5% more power compared to our previous lever • Ergonomic design to fit around other handle bar items • The Tech 3 lever is directly compatible with Shimano I-Spec shifters

• Rigid CNC'd one piece caliper • Increased piston diameter • Tech 3 lever offers 5% more power compared to our previous lever • Ergonomic design to fit around other handle bar items • The Tech 3 lever is directly compatible with Shimano I-Spec shifters