Parts

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: DIVINE SL and DIVINE SL RASCAL

Multi-purpose suspension grease. Special additives help prevent corrosion and seizure and keep wipers and seals smooth when using it for routine services on your BikeYoke dropper post. - Suitable for all BikeYoke dropper posts - Size: 30ml (lasts for 5+ full services)

Single aluminium clamp design with covered/hidden bolt - Dual-compound with soft grip area and harder endcaps for impact and scratch protection - Non-centric, offset-design. The grips are indeed round, but the rubber is thicker on the rear side, so we have around double the rubber thickness on the palm side - Cut-out inner sleeve for extra rubber thickness on the palm outside for even more extra padding and damping - Relief pattern on the outside palm area (rider facing) and on the fingertips area (front side) for feeling and grip - Weight: 113g /pr - Length: 140mm - Diameter (rubber part): 31mm - For handlebar diameter: 22.2mm

The REVIVE MAX 213 follows her slimmer sister and now comes as a 2.0 version with 213mm of infinitely adjustable travel. With the release of the REVIVE 2.0, the extra-long 213mm post required a lot of re-thinking for the whole chassis structure. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strength and stiffness at the same time. - Updated one-piece 3D forged upper tube design for increased stiffness - New CNC actuator lever provides even smoother action - The patented Reset Valve function easily bleeds/resets your "springy" post in just a few seconds - Low friction and super smooth movement, due to less seals and it's non-IFP design - Sub-zero temperature functionality - Short overall length; 213mm post is 582mm long - Compatible with oval and carbon saddle rails - Rotatable foot for extra clearance inside the seat-tube - Fully user serviceable - 690g Sold as seatpost only—Remote/Trigger's are sold separately.

Fits: REVIVE/REVIVE 2.0, REVIVE MAX, and DIVINE Includes: - x1, Cable clamp body (# 52) - x1, M4 Set screw (# 7)

Because of the many technologies featured, SAGMA is likely the most advanced bicycle saddle you can currently find on the market. Not only the patented rail suspension and the new foam technology and Skin cover, but also the super short overall length are ahead of the competition. SAGMA Carbon is our halo model with lighter and flexier Carbon rails as opposed to aluminum rails on the standard SAGMA. - Rail Suspension Design - idbeads foam technology with low speed rebound properties - PU-Skin covering - Carbon reinforced shell - Exchangeable shock absorber units with 3 different hardnesses (soft, regular, hard) - Carbon rails 7x10mm (high-oval) - 210g

Take away the suspension rail design, and you get our SAGMA Lite saddle, the more traditional looking option in our line-up, featuring standard CrMo rails. At a lower pice point than our top models, the comfortable idbeads foam technology, the PU-Skin, and the carbon-reinforced extra short saddle shell still remain. - idbeads foam technology with low speed rebound properties - PU-Skin covering - Carbon reinforced shell - CroMo/Steel rails (7x7mm) - Width x length: 142mm x 242mm - 225g

Squeezy—not just another seat clamp. We never just want to make something, that´s already there. We want to make something different, something better. Unlike other seat clamps, Sqeezy has a collar-less design. Collars are basically just a installation aid, to prevent the clamp from sliding down the seattube, but in fact they locally stiffen up the clamp and hinder it from distributing the clamping force evenly. Squeezy acts like a thin metal band, that perfectly snuggles around the circumference of your seattube and smoothly secures your seatpost in place. - Material: AL7075-T6, fine-feed CNC finish - Titanium T-25 clamping bolt - Collar-less design for more even clamping force distribution - Three Slip-Stopp installation aids - Only 8g !

An extremely nice looking full aluminum headset topcap made in one piece. Laser engraved and then black anodized for a classy black in black matte/shiny finish. - Weight: Feathery 5g

This BikeYoke allows the use of a standard shock in your Specialized bike. Enduro 2013, 26" Enduro EVO 2015-2016, 650b (with 210x55 shock) Includes: - 1x BikeYoke # 2.1 (Y021) - 1x DU bushing - 1x reducer - 1x stainless steel bolt

This BikeYoke allows the use of a standard shock in your Specialized bike. Enduro 2015-2016, 650b Includes: - 1x BikeYoke #4 (Y04 for 200 x 57/7.875" x 2.25" shock) - 1x DU bushing - 1x reducer - 1x stainless steel bolt

This BikeYoke allows the use of a standard shock in your Specialized bike. Enduro 2017-2019, 650b & 29" Includes: - 1x BikeYoke #6 (Y06) for high setting with 200x57 shock - 2x bearing - 1x DU bushing - 1x reducer - 1x stainless steel bolt

This BikeYoke allows the use of a standard shock in your Specialized bike. Enduro 2017-2019 650b & 29" Includes: - 1x BikeYoke #7 (Y07) for low geometry setting with 210x55 shock (roughly -8mm BB and -0.5° HA) - 2x bearing - 1x DU bushing - 1x reducer - 1x stainless steel bolt

This BikeYoke allows the use of a standard shock in your Specialized bike. Enduro 2017-2019 650b & 29" Includes: - 1x BikeYoke #7.1 (Y071) for standard geometry setting with 210x55 shock - 2x bearing - 1x DU bushing - 1x reducer - 1x stainless steel bolt

This BikeYoke allows the use of a standard shock in your Specialized bike. SX Trail 2009-2012 Includes: - 1x BikeYoke SX01 - 1x DU bushing - 1x reducer - 2x custom stainless steel bolts yoke/rockarm - 1x stainless steel bolt

The Goats Grip just went Super Soft. Prototyped through the 2020 season and based on the World Cup Winning pattern of the Bartender Pro as used by Greg, as well as Nina Hoffman, Danny Hart and Angel Suarez. - Super Soft Compound - 31.5mm Diameter - Single Lock-on - Tapered Core

DPX2 Damper Shaft for FOX suspension service and repair. - FOX Damper Shaft - Steel, DPX2, 2pc, 0.360 ID, 0.498 OD, 3.070 TLG, 210/185X 55/50

Replacement compression knobs for RockShox suspension forks.

Replacement compression knobs for RockShox suspension forks.

If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The Rival XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries - Cage Material (RD): Aluminum - Pulley Bearings Material: Steel - Max Tooth: 44 NOTE: Does not include eTap battery. Compatible with existing eTap batteries.

Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit

- 9 speed wide range - 11-40t - Steel spider

- Customize your ride with WolfTooth's anodized aluminum Bling kits - Extremely lightweight - Includes 3mm, 5mm, 10mm, and 15mm headset spacers, stem cap with integrated 5mm spacer, and 4 color-matching alloy bottle cage bolts - Also includes black top cap alloy bolt - Made from 6061-T6 aluminum

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

RockShox Rear Shock Parts

RockShox 35mm Seal Kit

- Aheadset preload adjusting bolt

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Brake Lever Parts

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

RockShox 32mm Seal Kit

RockShox 32mm Seal Kit

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Replacement piston and seals for Hope disc brake calipers.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Replacement piston and seals for Hope disc brake calipers.

Hope Brake Lever Parts

Replacement piston and seals for Hope disc brake calipers.

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

The Gyro G3 upper top plate is designed for use with the G3 detangler.

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.