Aero & Aero Road Helmets
$149.99 $149.99 - $150.00 On Sale
This is the aero helmet you want when you’re pushing your limits in racing and training. The Tardiz2’s aerodynamic shape and design features will ensure you’re cool, comfortable, and most importantly, fast. The aerodynamic Tardiz2 is built for speed. The teardrop shape of the helmet and its dimpled tail section improve airflow, saving you precious watts when you’re racing against the clock in triathlons and time trials. The TS+ fit system ensures a snug and comfortable fit and can be secured with an easy to access dial for fast transitions. The open front allows you to use your favorite eyewear. Three small vents in the front and large ports the open tail at the rear draw air in and through the helmet. For maximum cooling, the Aquavent allows you to squirt water directly onto your head. When every watt counts, use the closed ventilation cap to increase aerodynamic performance. - Weight: 372g - Material: EPS foam, polycarbonate, nylon Adjustable Head Basket - Allows the back part of the retention system to be adjusted up and down depending upon your preference and comfort. The nylon ratchet system can be pushed high and out of the way, or low for a feeling of increased security. Aquavent - Spring-loaded cap on the top of the helmet. Use the tip of your water bottle to push the cap open and pour water directly on your head for evaporative cooling. Dimpled Tail construction - The rear of the helmet has a dimpled surface to trap an air layer around the tail of the helmet and improve aerodynamic performance. Eyewear friendly - The front of the helmet and ear pads are an open design so that you can use any eyewear without interfering with the helmet’s fit. Turnfit Plus system (TS+) - A unique fit system which prevents hotspots or pressure points by making the adjustment around the entire circumference of your head.
$250.00 - $329.99
Giro's Aerohead MIPS takes the same wind-cheating silhouette as the leading-edge Aerohead Ultimate, but adds increased ventilation to keep triathletes and time trialists cool when the competition is hot. By using a polycarbonate shell, Wind Tunnel ventilation, and internal channeling, this helmet is proven to boost cooling power while remaining aerodynamic. Additionally, Aerohead MIPS features a wrap-around eye shield that offers an impressive field of view with the convenience of a magnetic anchor attachment to allow easy storage of the lens in the "flipped up" position—perfect for fast swim-to-bike transitions.
$275.00 - $300.00
The Vanquish MIPS is the pinnacle of high-performance road cycling helmets, featuring the innovative TransformAir design that actively streamlines airflow to reduce drag. Inside the Vanquish is an EPS liner with progressive layering, and Giro's renowned RocLoc Air system seamlessly integrated with MIPS technology to enhance comfort and cooling power while providing an additional measure of protection. So whether you're hammering off the front, smashing an Ironman course, or laying down maximum wattage in the dash to the finish line, the Vanquish shapes the wind to work for you.
Helmets have long been plagued by an unspoken rule: Light weight, ventilation, aerodynamics—pick two, there's your helmet. As you can tell by now, though, we don't play by these rules—or really any for that matter. We'd rather turn standards on their head and create products that nobody ever dreamed of. And you needn't look any further than the new S-Works Evade helmet for proof of this. Straight up, it's the fastest road helmet out there. We've teamed up with MIPS researchers to introduce MIPS SL—a new, ultra-light, and supremely comfortable version of MIPS that's available exclusively on Specialized helmets. With MIPS SL, we've essentially integrated MIPS technology within the helmet padding itself. MIPS SL's minimalist "watchband" attachment system provides 10 to 15 millimeters of rotation in every direction and offers the same brain protection benefits as other versions of MIPS, while also ushering in a new level of comfort and weight savings. Beginning with the aerodynamic development, we basically lived in our Win Tunnel to create this Evade. Having our own wind tunnel allows us to develop our products with aero at the forefront of the design, rather than merely testing them there. With this, we carefully analyzed every aspect of helmet performance in the Win Tunnel, and with real world testing, to ensure that we left no stone unturned in the quest for performance. This makes for a helmet that has countless testing hours and years of development, and ultimately, this adds up to the fastest road helmet we’ve ever tested. We not only took grams out of the drag, but we did it without sacrificing safety. In fact, we switched the construction to favor our Energy Optimized Multi-Density EPS that optimizes the foam type in different places. As far as ventilation is concerned, free-flowing air through the helmet not only makes the helmet cooler than ever, but it also decreases aerodynamic drag. Going hand-in-hand with this, ventilation and aerodynamics were both optimized in the Win Tunnel together, making for the best combination of aerodynamics and ventilation out there. Now, the exterior vents and interior channels have been carefully considered to make sure that the helmet draws in the maximum amount of air through the helmet for extreme cooling. And the result? The new Evade is just as cool as a bare head with no helmet, making it the coolest aero helmet on the market today. Through this work, the Evade saves 50 seconds over 40km versus a traditional road helmet and roughly six seconds over the prior iteration of Evade. This means that it's not only as cool as a bare head, but also as fast. For road race helmets, there’s nothing that can match this performance. Last, but most certainly not least, a fast helmet is useless unless it fits correctly. With this in mind, the new S-Works Evade has all the features you'd expect from a top-level helmet, like our Mindset HairPort 2 fit system with micro-adjustments, our soft webbing that won't stretch out, and a new Gutter Action brow pad that manages sweat to keep it out of your eyes. And to top it off, we've added a new magnetic buckle to the mix that makes buckling with one hand a breeze. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - New MIPS SL is the lightest, most ventilated MIPS protection to date and is exclusively available on Specialized helmets. - Through extensive Win Tunnel development, the Evade is the fastest road helmet we've tested. - 4th Dimension Cooling System with deep internal channels, large vents, and aligned exhaust ports make it the best combination of aerodynamics and ventilation. - Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. - Patented Aramid-Reinforced Skeleton provides internal EPS support to help manage impact energy. - Ultra-light Mindset HairPort II micro-dial fit system with height adjustability for the perfect fit. - Gutter Action brow pad design for increased comfort and sweat management. - Thin, soft, and lightweight 4X DryLite webbing won’t stretch out with sweat or water. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Our available aftermarket ANGi sensor gives you and your loved ones peace of mind like never before. When combined with our Specialized Ride app, the ANGi sensor will evaluate the forces acting on the helmet in the event of an accident and, if necessary, send a text message to your specified contacts with your location. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Instrap webbing system for ultra-light construction and security. - Magnetic buckle is simple and secure.
3D dry - The tri-dimensional 3D DRY padding utilizes a multi-layer open cell construction process: high technology for the best comfort and performance. Aero Control - Incredibly aerodynamic and top performing shell, tested in the wind-tunnel and able to provide a really impressive CX rate. - Any position the head will assume the outflow of the air will be perfectly in line with the helmet. Coolmax - Removable and washable inner padding in Coolmax® material ECO Chinstrap - Chin pad with eco-leather chinstrap - The anallergic and washable chinstrap is extremely comfortable and helps to avoid irritation of the skin M in-molding - The innovative “in-molding” technology, joining the inner polystyrene cap to the outer polycarbonate one, ensures a better shock absorption. Magnetic Visor - The innovative magnetic visor is patented by KASK and integrated to the helmet thanks to a five magnets’ system. - The total adherence of the visor to the helmet allows a continuous air flow and a great aerodynamic.
Page 1 of 1