Filter By:
- Rollers (2)
- Trainers (10)
- Smart Trainers (11)
- Parts & Accessories (55)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Indoor Cycling
$30.00
The Gel Block is an indispensable accessory for perfecting your position on the bike and provides a more natural feel to your training.
- Reduces vibrations on the handlebars for more comfortable training
- Non-slip Elastogel insert ensures maximum stability and alignment of the front wheel
- Suitable for road and MTB
$39.99
This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly
- Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6%
- Anti-slip rubber feet eliminate handlebar vibrations
- Internal design that guarantees maximum wheel stability
- Suitable for both road and MTB
- You can attach to the trainer frame when not in use for easy transport and storage
$44.99
The Elite Thru Axle adapter kit makes Elite trainers compatible with bicycles with 10mm to 12mm diameter through bolts on the rear wheel (lengths from 130mm to 148mm boost). Easy to set up to start right away with your training, this Thru Axle adapter is made from quality material to ensure an immediate setup and great protection to the threads of your bicycle frame. This unit does it all!
$59.99
The Elite Folding Mat increases the comfort of your home cycling setup while protecting the surfaces you train on every day. It's easy to use, store, and transport and can be stored everywhere in your house.
Dimensions: 1.8m x .9m
$59.99
Protects the bicycle from sweat and avoids corrosions or rust.
- Prevents an accumulation of sweat on the frame and components that would lead to corrosion or affect the finish
- Sits above the top-tube and can be adjusted for different bicycles
- Washing-machine friendly
$79.99
- Sram XD and XDR freehub for Direct Drive trainers (Drivo and Direto's family, Suito, Turno, Kura, Turbo Roteo and Volano).
- Compatible with 12 speed cassette.
$89.99
Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer.
- Reads data based on the type of trainer used.
- Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices.
- When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.
$100.00
The Elite Smart Sterzo riser block allows steering up to 34 deg while riding your rear wheel trainer while using ANT and Bluetooth communication protocol, interacts with compatible apps to give you the most realistic indoor ride. It’s rotating pivot features a practical automatic return system for you to easily get the handlebar back to its original position.
Compatible with tires up to 56mm wide
$109.99
The Training Mat is the finishing touch to your training area. Placed between the home trainer and the floor, it improves comfort and protects your home from oil, dirt, and sweat. Plus, it limits the noise produced by training, especially on wooden floors.
- Easy to roll up and store away
- Dampens vibrations
- Easy to clean
- Length: 1800mm
- Width 900mm
$199.99
Top resistance unit, innovative frame: excellence renewed
- 8 resistance levels adjustable by a practical selector on the handlebar.
- Use the Misuro B+ sensor for compatibility with the My E-Training or third party apps.
Tech info
- Novo frame: integration of steel and technological plastic materials.
- Magnetic resistance unit, very compact.
- Maximum stability at high speeds or at maximum effort guaranteed by the absorbing structure of the frame.
- Lifting of the bicycle is limited to the minimum.
- Fast fixing system: the bicycle can be clamped and released with a single quick operation.
- New adjustable support system, allowing an adequate and constant pressure between the roller and tire.
- 30 mm diameter elastogel roller.
- The training roller folds up easily and becomes compact for easy transport or storage when not in use.
- Adapts to all wheels from 24" to 29".
$299.99
Elite Qubo Power Fluid Trainer offers exponentially progressive fluid resistance of 540W @ 40km/h, up to 1,200W @ 60km/h
- Elastogel roller reduces noise and tire wear
- My E-Training App & Desktop 1 month free
- Compatible from 20- to 29-inch wheels
$349.99
Introducing Tuo, Elite’s new indoor home trainer created in cooperation with Adriano Design. Tuo is an interactive wheel-on home trainer featuring automatic resistance adjustment. It’s a reliable technological companion with a compact design, created to seamlessly fit in any part of your house and to take your training sessions to the next level. It exudes a Made in Italy design that's both understated and distinctive, and that makes it fit right in with your living room or office furniture when not in use.
Tuo features a solid, compact structure made with high-quality materials: aluminum resistance unit, steel frame, and legs made of beechwood—one of the most beautiful, sturdy, and solid materials used in interior design. Beechwood is not just about the look though, it’s also perfect for absorbing vibration while training and for ensuring great stability. Additional features include stability-enhancing, anti-slip rubber feet and the Fast Fixing locking system—by engaging a practical lever, you can hook and unhook the bicycle to the support frame in a single quick operation.
Light and easy to transport, Tuo features easily foldable frame and legs, so setup is immediate, anytime. Tuo is not just very compact and gorgeous to look at, it’s also quiet. The roller is made in Elastogel material, which is an exclusive polyurethane molecule developed and tested by Elite to limit friction noise by 50% and decrease tire wear. Thanks to the practical side micro-adjustment mechanism and the ability to easily reposition the stand for 29-inch wheels, bicycle setup is simplified. Tuo is the most versatile among our home trainers, as it is compatible with frames with wider chainstays and includes all the necessary adapters to install bicycles with rear axles ranging from 130x5mm quick release to Boost 148x12mm thru-axles.
Tuo is a smart, interactive home trainer that connects with multiple apps, software, computers, and devices (smartphones and tablets) with iOS, Android, OSX, and Windows. Data transfer between the trainer and other areas of the system is wireless. Using this feature allows you to manage resistance levels and change display parameters, for convenient personalization and interactivity on your indoor training session. Tuo sends Power and Speed data and can be managed via the My E-Training software (12-month free subscription) or other indoor cycling services, such as Zwift, TrainerRoad, The Sufferfest, Bikevo, Kinomap, and many more.
$549.99
SUITO-T is the Elite Suito home trainer without supplied sprocket cassette, a powerful and compact model that offers total compatibility with several types of bicycle.
Powerful, solid, and quiet, SUITO-T is an interactive home trainer designed to offer a realistic, accurate, and fun bicycle workout experience.
Featuring direct transmission to ensure increased accuracy and quietness while working out, the SUITO-T is very stable trainer even during the most intense sprints, and its small size makes it easy to transport and store everywhere.
What's the difference between a Suito and a Suito-T?
- SUITO and SUITO-T are two identical home trainers, featuring the same technical specifications both in terms of structural and electronic features.
- What separates them is the sprocket cassette, which is included in the Suito but not included in the SUITO-T.
Compact design
- The main feature of this home trainer is the sturdy steel structure, ideal to ensure durability and stability even during intense sprints.
- Featuring an elegant and solid profile, SUITO-T has a wide support base with pre-assembled support legs. Just position them properly to trigger the automatic lock mechanism.
- SUITO-T is designed to ensure a small footprint wherever you go: its integrated handle, reduced size, and slim profile makes it easy to transport and store everywhere without worrying about its footprint.
- SUITO-T optimized design makes it compatible with various bicycle models and commercially available sprocket sets.
Accurate and powerful bicycle workouts
- SUITO-T simulates gradients up to 15% with ± 2.5% accuracy, one of the most powerful home trainers you can use to release all your power even during the most intense sprints.
The following functions also contribute in displaying accurate workout data:
- Power Meter Link (PML): It's a function that lets the home trainer employ an ergometer that's already installed on your bike as a power source.
- Spindown: A calibration procedure for the home trainer that takes into account all friction values that change over time and during use that influence brake's accuracy and compensates its effects on the resistance generated by the home trainer.
- Temperature compensation algorithm: A function that lets the home trainer compensate the variations due to brake overheating and take the resulting data into account when calculating power.
Train on Zwift and My E-Training!
- Discover all the software you can use with SUITO-T: other than Zwift and My E-Training, you can also manage it with all other indoor cycling platforms such as TrainerRoad, Kinomap, Rouvy, Bkool, Bikevo and many more.
- SUITO-T adds up to the Elite home trainers' range of ANT+ FE-C & Bluetooth home trainers that interact with every app, software, computer and device (smartphones and tablets) via iOS, Android, MacOS and Windows. Just choose the software, select the course or training program and start pedaling on your bike. SUITO-T will automatically adjust resistance.
Sensorless cadence
- All home trainers by Elite immediately send power, speed, and cadence data, thus setting themselves as effective instruments to build an accurate training program and replicated outdoor workouts as much as possible. Cadence is measured via a practical sensorless technology (that is, no sensors to apply to your bicycle) and is calculated on the SUITO-T as a function of speed variations.
$66.00
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party!
- Non-slip surface keep you safe while in cycling cleats
- Protects floors from sweat and bike grime
- Water-repellent surface does what it was designed to do – keep sweat off your floor
- Compress-ability ensures trainer stays put during intense efforts
- Easily rolls up for storage
- Cleans easily with soap and water
- Absorbs noise and vibration
- Enhances overall stability of any indoor trainer setup
- 4mm (5/32?) thickness is optimal balance of support and storage
$170.00
You’re already a proud owner of the Omnium Over-Drive Bike Trainer, but today you’re looking for a resistance-free, simple and effective spin session. Designed to be lightweight and portable, the Omnium Zero Resistance Sled is adaptable to whatever bike you ride and whatever workout you’re targeting – let the Zero-Drive Sled be your next training accessory.
- Precision machined 4.25” aluminum rollers create a smooth and quiet ride
- Dynamic, free-floating rear wheel design promotes the most realistic, road-like riding experience
- Adaptable to virtually any bike (up to 1348mm wheelbase with optional extender)
- No tools required to assemble or store — simply unfold for use and fold for storage and travel
- Maintenance-free resistance unit and roller bearings
- 3-Year Warranty
$440.00
Love riding when you travel? Weekends spent at the races? Or just want to be able to train in a small living space? Meet the Omnium Zero-Drive Portable Trainer. The foldable, compact and adaptable fork-mount design keeps the rear wheel on the bike and offers the most dynamic ride quality of any trainer available. Plus it’s unique roller design is so quiet you’ll never disrupt the neighbors. When you’re finished, the elegant folding design hides in its padded tote like it was never there. Add a Sweat Guard and Floor Mat and you’re armed with the complete training package.
- Zero Resistance is ideal for high-speed spinning and track cycling workouts
- Adaptable fork-mount and sliding sled design (16”-29” wheel; thru-axle and QR compatible)
- Lightweight 13.3lb (6.03kg) design makes it the ideal, portable cycling training partner
- Precision machined 4.25” aluminum rollers create a smooth and quiet ride
- Dynamic, free-floating rear wheel design promotes the most realistic riding experience of any stationary bike trainer
- Included fork adapters:
- 9mm Quick-Release
- Thru Axle: 12×100mm, 15×100mm & 15×110mm
- Available fork adapters:
- Cannondale Lefty, 20x100mm (BMX thru axle), 8mm x 74mm (folding bike)
- Adaptable to virtually any bike size and geometry
- Optional Sled Extension (up to 1348mm wheelbase with optional extender)
- No tools required to assemble or store — simply unfold for cycling training and fold for storage and travel
- Maintenance-free resistance unit and roller bearings
- Includes heavy-duty, water- and abrasion-resistant tote bag for easy transport and storage
$490.00
Love training when you travel? Need an awesome warm-up and cool-down during weekends at the races? Want to crush that indoor bike trainer workout in a small living space? Meet the Omnium Over-Drive Portable Bike Trainer. The adaptable fork-mount design keeps the rear wheel on the bike and offers the most dynamic ride quality of any stationary bike trainer available. Plus the precision rollers and internal progressive resistance design is so quiet you’ll never disrupt the neighbors. When you’re finished, the elegant folding design hides it in its padded tote like it was never there. Add a Sweat Guard and Trainer Mat and you’re armed with the complete training package.
- Dynamic, free-floating rear wheel design promotes the most realistic riding experience of any stationary bike trainer
- Patented, Internal Progressive Resistance via friction-less Eddy Current
- Parabolic, progressive resistance curve accurately simulates outdoor cycling (rolling + wind resistance)
- Adaptable fork-mount and adjustable sled design (16”-29” wheel; Thru-Axle and QR compatible)
- Lightweight design for a complete bike trainer system – 14lb (6.35kg)
- Precision machined 4” aluminum rollers create a smooth and quiet ride
- Included fork adapters:
- 9mm Quick-Release
- Thru Axle: 12×100mm, 15×100mm & 15×110mm
- Available fork adapters:
- Cannondale Lefty, 20x100mm (BMX thru axle), 8mm x 74mm (folding bike)
- Adaptable to virtually any bike size and geometry (up to 1348mm wheelbase with optional extender)
- Maintenance-free resistance unit and roller bearings
- Includes heavy-duty tote bag for easy transport and storage
- Compatible with cycling apps: Zwift, The Sufferfest, TrainerRoad and Kinomap traditional trainer features*
- Patent number: 9,393,475
*Requires ANT+ or BT rear wheel speed sensor
$70.00
The Giant Indoor Trainer Mat is the perfect noise-reducing floor protection for indoor training.
- Rubberized material for easy rinse off after your workout
- ‘Pebbled’ surface, anti-skid and scratch-resistant material protects flooring while working out
- Extra-large 3’ x 6’ (91.5cm x 183cm) size covers entire workout area, prevents perspiration from getting on carpets or wood floors
- Comes rolled-up in draw-string, mesh carry bag with shoulder strap
$10.99
The Mag Riser Block 3 from Minoura lifts up your front wheel during a training session to be at a natural level. This block fits both MTB and Road bike tire widths.
- Fits under front wheel to level the bike to get natural riding on training
- Double grooved design fits your narrow or wide ties
- Polyethylene material minimizes weight at 1/2 lb.
- 8.6D X 4.7W X 2.75H (inches)
$12.99
Keep your handlebar organized and your devices secure with the LW-STD (22.2/25.4/28.6mm) from Minoura.
- Alloy clamp for mounting your own device on handlebar or stem
- Lightweight and rustproof aluminum construction
- Hex wrench required for instillation and removal
- Clamp body has (1) M5 Thread hold in center
- 22.2 mm-28.6 mm diameter range
$37.99
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles.
- Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media
- SM clamp easily mounts or dismounts from the handlebar or tube
- Spring-loaded clamp system is simple to use and securely holds your device in place
- Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system
- Can mount to your repair stand so you can easily reference the Internet when working on your bike
$649.99
Minoura, the company that invented the mag trainer, now brings you the SmartTurbo Kagura LS9200 trainer. This trainer operates in either a fixed or gravity mode, allowing the user to train more traditionally or by simulating a downhill ride. Using Bluetooth or ANT+, the trainer will connect to your smartphone, tablet, or laptop to transmit data, OR you can use apps (on ios, android, Windows and Mac!) from Zwift, Kinomap and more to create an amazing simulation of outdoor riding. It will also talk to select products from companies like Garmin to simulate a workout or course. This trainer is smooth and quiet, and can be used (with the Neodymium magnet) straight out of the box! This will allow the user to warm up before a race, for example, and then take it home and plug it back in for Smart training. It will accommodate 650b/700c/26"/27.5" tires, and includes a QR skewer for rear hub widths from 125-140mm.
$677.99
For the professional or advanced rider or even for studio use, the Minoura LiveRoll R800 is the world's best roller.
- A heavy and wide roller with steel covers attached. Can be used for smoother and higher-speed rotation practice over other smaller diameter rollers.
- Matched wheelbase adjustability with continuous adjustment on frame.
- Uses a high-rigidity and lightweight aluminum frame with front drop roller that adjusts the middle roller to provide a safe spin even at high RPM's.
- Feet and footrest are height-adjustable at six points.
- 22" wide x 6" high x 52" long
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$54.00
Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- This axle is for Surly bikes with the MDS/Gnot Boost system.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability.
- No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
$24.99
The Saris Leveling Block keeps your bike level with your trainer.
- Adds stability to your training ride.
- For use with any rear wheel-mounted trainer.
- Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
$25.00
$50.00
50% Off
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors.
- Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions.
- This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch.
- The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems.
- Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly.
What's Included
- Thru axle
- Washers
- End caps with bolts
$29.99
Keeps corrosive sweat from reaching your frame.
- Cell phone pouch included.
$29.99
- Includes clutch knob and L-bolt
- Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt
- Magnus Clutch Knob should only be used with Magnus Smart Trainer
- Watch our video to learn more
$39.99
Adjust resistance on Mag trainer without leaving the saddle.
- Quick Release mounting system fits most stems.
- For use with the Mag bike trainer only
$49.99
For a stable, worry-free ride with any rear wheel-mounted trainer.
Product Features
- For a stable, worry-free ride with any rear wheel-mounted trainer.
- Unique 3-level design lets you select the level of difficulty.
- Stack two blocks to simulate climbing workouts.
Three different positions to raise your front wheel and simulate hill climbs
- 2.1 inches (5.3 cm)
- 2.7 inches (6.8 cm)
- 3.1 inches (7.9 cm)
$54.00
$60.00
10% Off
Adapts a thru axle hub bike for a Saris bike trainer.
- Trainer Thru Axle Adapter For Saris Trainers
- Thread pitch: 1.00 & 1.75
What's Included:
- Thru axle
- Washers
- Endcaps with bolts
Trainer Compatibility
The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions.
Bike Compatibility
Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
$59.99
$60.00
On Sale
TRAINER THRU AXLE ADAPTER FOR SARIS TRAINERS
WHAT'S INCLUDED:
- Thru axle
- Washers
- Endcaps with bolts
- The 148x12mm adapters also come with a shorter bolt action slider tube.
TRAINER COMPATIBILITY
The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions.
BIKE COMPATIBILITY
Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. Both 148x12 Thru Axle Adapters are compatible for both 142 and 148mm bikes.
148x12 Thru Axle Adapter, 1.5 Thread Pitch (9733T) works for:
- 148 x 12mm
- 142 x 12mm
- 1.5 thread pitch
$79.99
Protects your floor from sweat and bike grime.
Product Features:
- Protects your floor from sweat and bike grime.
- Keeps your trainer from "walking" during intense workouts.
- Durable construction absorbs vibration and noise.
- Training mat measures 65 x 36 inches.
- Black PVC foam gives the training mat superior sound absorption.
- Resistant to moisture, and easy to clean with soap and water when necessary.
$129.99
Everything you need for the best indoor trainer experience possible.
- Can be used across a wide range of trainer setups.
- Includes Trainer Mat, Climbing Block and Saris towel.
$199.99
No fancy gizmos. No wires. No fuss. If you’re looking for an easy way to ride your bicycle indoors, call off the search – you’ve found it.
Whether your training for a local charity ride or working to beat your friend’s FitBit score, the Mag indoor bike trainer can help you make it happen. Simply connect the trainer to the rear wheel of your bike, hop on, and pedal away. Plus, the Mag comes with five adjustable levels of resistance so you can adapt every ride to your liking.
- Magnetic resistance unit provides a quiet and frictionless ride.
- Linear resistance boosts workout intensity to match each pedal stroke and gear click.
- Features five adjustable levels of resistance
- Compatible with Zwift and other indoor training apps
$200.00
Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season.
Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike.
Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started.
- Magnetic resistance unit provides a quiet and frictionless ride.
- Linear resistance boosts workout intensity to match each pedal stroke and gear click.
- Mag+ comes with convenient, adjustable handlebar-mounted shifter.
- Compatible with Zwift and other indoor cycling apps
$299.99
Take on any race, club ride, or weekend adventure with confidence. When you add Saris rollers into your training routine, you'll increase your balance, control, and ability to ride a straight line — all of which translate to more efficiency, power, and technique on the road.
And, because you have to pedal 100% of the time to balance your bike, you get an amazing workout, no matter your pace.
- Improve balance, control, and ability to ride a straight line.
- Aluminum roller drums run silently and smoothly.
- Precision-lathed 3.25" aluminum roller drums won't distort in heat or sunlight.
- Fold flat or stand on end for convenient storage.
- Designed for both indoor and outdoor use
- 16" wide wheel base fits just about any size of bike and allows plenty of room to move around.
- Rubber foot pads ensure that the only thing moving on the rollers are the drums, providing a secure, sturdy ride.
- Durable steel-frame construction
- Adjustable belt for right and left dismount
- Resistance Roller uses zero moving parts to deliver quiet magnetic resistance.
- Maximum wheelbase 44.5" (axle to axle)
- Minimum wheelbase 37.5" (axle to axle)
$349.99
A Killer Training Combo
What happens when you pair a speed sensor with the #1 selling bike trainer in the USA? You get a combo that’s ready for any virtual—or non-virtual—training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Rouvy and Zwift, without a traditional smart trainer.
Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid2 trainer with our innovative club knob, connect to your virtual training app of choice via Bluetooth or ANT+, and voilà! - you’re ready to sweat.
Product Features
- Fluid resistance unit provides a quiet and consistent ride.
- Progressive resistance offers the widest resistance range and road-like feel.
- Included speed sensor connects you with Rouvy, Zwift and other indoor cycling apps.
- ANT+ USB and BlueGiga USB sold separately.
- Includes one month subscription to Rouvy virtual training app
In the box:
- Fluid² Smart Equipped Bike Trainer
- Dual-band magnetless speed sensor
- Fluid² is the best-selling trainer in the USA.
- Fluid resistance unit creates optimal road-like feel.
- Fluid resistance unit provides a quiet and consistent ride.
- Noise level at 20 mph is super quiet 64-68 decibels.
- Large, individually precision-balanced flywheel allows for improved road-like feel.
- Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer.
- Eccentric leveling feet allow for easy adjustment on uneven surfaces.
- Comes on the foldable Classic frame with spring loaded, bolt-action lever.
- Precision-machined alloy roller reduces tire wear and slippage.
- Features clutch knob for perfect roller-to-tire tension each ride.
- 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes – up to a 2.0 tire.
- This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm.
- Trainer tire recommended.
- Compatible with indoor cycling apps.
- Trainer is tested to the combined weight (rider and bike) of 300 lbs.
- Optional thru-axle adapter available for 142x12mm and 148x12mm bikes.
- ANT+ USB and BlueGiga USB sold separately.
- Formerly branded as CycleOps Fluid² Smart Equipped
$359.99
Trainer Mission Control
Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland.
And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one.
- Stay Charged: built-in power strip keeps training necessities nearby and powered up.
- Pick Your Height: adjustable for wide range of bikes and training configurations.
- Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride.
- Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing.
- Enhanced Experience: a great addition to indoor training.
Specs
- Base: 13-inches wide x 36-inches Depth
- Desk Top: : 12-inches Width x 20-inches Depth
- Adjustable Desk Height from Floor: 40- to 55-inches
- Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware
- Cord Length: 6- foot AC cord
- Built-in power strip with 2 AC and 2 USB outlets
- Built-in cord retention clips for easy cable management and a clean look.
$499.99
Whether you want to attend a group ride in Zwift, climb the Dolomites in Rouvy, or simply need a sweat session, the M2 smart trainer can get you there. All you need is your bike, the M2, your favorite virtual training software, and device of choice.
This do-it-all, smart bike trainer is capable of replicating any workout thrown its way, up to 1500 watts and a 15% climbing grade. Simply connect to your virtual training application of choice via integrated dual-band ANT+ FE-C and Bluetooth, and let the M2’s electromagnetic response system do the rest. And, thanks to integrated speed, cadence, and power data, you can track and record performance data without extra external sensors. Plus, our innovative clutch knob ensures perfect tire-to roller connection for every single ride.
- Noise level is a quiet 69 decibels at 20 mph.
- PowerTuned using PowerTap technology for accurate power readings up to +/- 5%.
- This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm, and 135mm.
- Optional thru-axle adapter available for 142x12mm and 148x12mm.
- Integrated dual ANT+ FE-C and Bluetooth standards.
- Fast response electromagnetic resistance ensures most responsive resistance and maximum power available.
- Robust design is capable of handling up to 1500 watts at 20 mph and can simulate up to a 15% climbing grade.
- Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2.
- Internally integrated speed, cadence, and power data eliminates the need for extra external sensors.
- LED indicator lights communicate connectivity and more.
- Internal cooling system moves air through the trainer to keep it cool while active thermal sensors ensure accurate performance data even during the hardest of workouts.
- Comes on the Saris foldable Classic frame with spring loaded, bolt-action lever.
- Features clutch knob for perfect roller to tire tension each ride.
- 2" resistance unit roller allows for 650b, 700c, 26", 27", and 29" - up to a 2.0-inch tire.
- Does not fit 650c wheel sizes, nor all 29er tires.
- Precision-machined alloy roller reduces tire wear and slippage.
- Eccentric leveling feet allow for easy adjustment on uneven surfaces.
- Trainer tire recommended
- Compatible with a wide variety of devices and virtual training applications, including Rouvy, Zwift, TrainerRoad, and many more. Contact us with questions about compatibility with other software.
- Over the air (OTA) firmware updates via Bluetooth devices ensures the M2 is up to date.
- Some assembly required
- All of our trainers are tested to the combined weight (rider and bike) of 300 lbs.
- ANT+ and BlueGiga USB dongles sold separately
- Not compatible with CycleOps- or Saris-branded 20/24" wheel adapter
$8.79
Replacement straps for Sunlite FlatForm II pedals
- Strap size: 340 x 55mm
$29.79
• Plastic riser block allows the position of front wheel at one of two heights
$185.39
- Smooth and powerful magnetic resistance
- Heavy-duty steel frame
- Folds for easy storage
- Fits MTB wheels 26"-29"
$230.99
Hook your bike up to Sunlite's F2 Trainer and ride whenever you want, regardless of weather, daylight or schedule issues. It features a heavy-duty steel frame for a stable base when you're cranking on the pedals and a quiet magnetic resistance unit for a real-world feel.
$272.99
Hook your bike up to Sunlite's F1 Trainer w/Remote and ride whenever you want, regardless of weather, daylight or schedule issues. It features a heavy-duty steel frame for a stable base when you're cranking on the pedals and a quiet magnetic resistance unit for a real-world feel. The remote lever attaches to your handlebar for easy resistance adjustment. Plus, this trainer includes an easy-to-use steel quick-release lever.
$634.99
No matter how busy you are, hop on Sunlite's F-5 Training Cycle and get a workout regardless of the weather outside. The fully adjustable design means you get a perfect seating position so you can perform at your peak, and the heavy-duty frame keeps flex to a minimum for awesome power transfer. Adjustable resistance allows you to tailor your workout, too, and the side-braking resistance design translates into longer bearing life. You can even track your time, speed, distance, calories, and total distance on the built-in computer. And when it's time to tuck the F-5 away, oversize wheels help you roll it across hardwood floors and even carpet.
$11.99
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.
$13.99
This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions.
- Highly absorbent
- Measures 30cm x 115cm
$19.99
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only
$29.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
$29.99
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.
$39.99
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
$49.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
$59.99
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
Page 1 of 2
Next page