Filter By:
- Parts & Accessories (164)
- Cyclo-Computers (36)
- GPS (6)
- Heart-Rate Monitors (5)
- Phone Accessories (15)
- Power Meters (31)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Electronics
In our opinion one of the best investments you can make to improve your riding is a bike computer. They'll help you log miles, map routes, and improve your fitness, making your riding experience that much more fun. Here is Full Cycle's top selling items in the computer category.
$23.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
$55.00
The only center-adjusting computer mount for quick and easy viewing. Compatible with all 1/4 turn Garmin® computers and watches, Wahoo®, and Cateye® bike computers. Centers your unit between aero bars. Adjustable arm center-adjusts your devices in 5mm increments.
By popular demand! Modify your Torpedo Versa, Torpedo Kompact 125 or 500 to mount more than just Garmin computers and watches! Switch out the mount insert for a Polar, Wahoo, or Universal strap-mounted bike computers such as Cateye or Sigma.
- Easily convert the highly-acclaimed, telescoping Torpedo Versa Computer Mount to work with a variety of popular bike computers
- Also converts the computer mount on the award-winning Torpedo Kompact 125 and 500 models
- With just the turn of a couple of screws, you'll be off and riding with your favorite bike computer
Kit includes (3) inserts, each clearly labeled:
- Wahoo
- Polar
- Strap-mount for computers such as Cateye or Sigma
Weight:
- Garmin/Wahoo Insert: 5g
- Polar Insert: 5g
- Universal Strap-Mount Insert: 12g
3 Year Limited Warranty
$99.00
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days.
- Telescoping Garmin mount features on-the-go tilt adjust to avoid glare.
- Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out.
- Capacity: 26oz (768 mL)
- Material: Plate: 6061-T6 Aluminum
- Cage: Nylon Composite Vee Cage
- Computer Mount: Nylon Composite
- Bottle: Lead free, BPA-Free and HDPE food safe certified bottle
- Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm
- Weight: 9.3oz (265g)
$15.00
With this adaptor piece, you are able to easily convert any Garmin quarter turn bike computer mount to a Wahoo bike computer mount.
$600.00
Brilliantly vivid. Effortlessly intuitive. The all-new ELEMNT ACE is Wahoo's largest and most powerful bike computer. With touchscreen convenience, a super-sized display, and ride intelligence that takes care of the details, it simplifies the ride so you can focus on the journey ahead. The result is an experience that makes planning, navigating, and analyzing your performance easier than ever, allowing you to take on big goals and bigger adventures.
- Intuitive touchscreen for easy control of maps and metrics
- Ready-To-Ride dashboard for quick access to workout profiles, routes, and sensor checks
- Dual-band GPS, real-time data, and up to 30 hours of battery life
- Integrated wind sensor to visualize and adjust for wind impact
In the Box:
- ELEMNT ACE GPS cycle computer
- Premium aluminum alloy mount (31.8mm)
- USB-C charging cable (24 in / 61 cm)
Tech:
- Total Weight: 7.4oz (208g)
- Dimensions: 4.9 x 2.8 x 0.8in (125x70x20cm)
- Display Size: 3.8in (9.7cm)
- Touchscreen: Yes
- Display Type: TFT
- Battery: Rechargeable Lithium-ion
- Battery Life: Up to 30 hours
- Connectivity: WiFi, Bluetooth 5.0, & ANT+
- Waterproof Rating: IPX7 (1M for 30 minutes)
- Memory: 64GB
- RAM: 2GB
- GPS: Dual-Band
- Accelerometer: Yes
- Altimeter: Yes
- Gyroscope: Yes
$40.00
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- It only weighs 7 grams!
- Provides accurate cadence data during your ride
- (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties.
- The RPM can be worn on your shoe for spin classes or use with multiple bikes
- Two LED lights show the sensor's device connection (blue) and cadence detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM cadence sensor will fit with most bikes and frame sizes
$70.00
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers.
- Dimensions (LxWxH): 1.25" x.75" x 1"
- Weight: 7 grams (without mount)
- Battery: CR2032
- Battery Life: Up to 12 months
- Water Rating: IPX7 (waterproof up to 5 ft)
- Wireless Signal Strength: Up to 10 feet
- Note: Speed Sensor is NOT compatible with spin bikes
$80.00
TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours.
- Dual band technology
- Real time heart rate and calorie tracking
- Advanced performance material
- USB rechargeable battery
- LED indicator lights
- Two adjustable bands included
- Third party app compatibility
- Apple watch and apple TV integration
$125.00
Introducing the TriRig Polymount, a 3-in-1 paradigm of versatility in cycling accessories.
Renowned by our athletes as the most versatile computer mount on the market, this exceptional mount offers options tailored for both between-the-arms (BTA) and on-extension setups, ensuring unparalleled adaptability to meet the unique preferences of every cyclist.
The ingeniously designed articulating arm empowers users to position their computer precisely where they desire, providing an unprecedented level of customization.
Crafted from the highest quality T6-6061 alloy and featuring a resilient hard-anodized finish, the Polymount stands as a testament to durability, promising a lifetime of reliable use.
This cutting-edge mount is not only compatible with Garmin and Wahoo computers but also extends its functionality to accommodate any GoPro-style camera. Elevate your cycling experience with the TriRig Polymount, where innovation meets unparalleled flexibility.
$630.00
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon and built to retrofit SRAM (road and mountain), Race Face, and Easton cranks with Stages Power, with added spindle purchase. No additional spindle purchase required for FSA 386EVO cranks.
This one Stages Power meter is built to rule them all—all of the most popular 30mm spindled crank sets, that is.
Interchangeable 30mm spindles bring Stages Power carbon to numerous popular crank sets. In order to fit a vast array BB30 based crank sets—including, SRAM, RaceFace, and Easton, as well as FSA’s 386EVO —Stages' engineers have developed a range of bottom bracket spindles that serve to mate our super-light carbon Stages Power meter to more than 10 different 30mm spindled crank sets.
Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions.
Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system.
Additional features:
- ± 1.5 % accuracy in all conditions
- Active temperature compensation
- Accelerometer based cadence measurement
- Wirelessly upgradable firmware
- LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset
- Updated accelerometer and addition of gyroscope for improved cadence resolution
- Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength
Specifications
- Power meter housing: low profile design, with robust door interface
- Weight: Only adds 15g to base crank arm
- Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter
- Power range (Watts): 0 to 5000
- Cadence range (rpm): 10-220
- Water resistance rating: IPX7
In the box
- Power Meter
- High quality CR2032 coin cell battery
- Lifetime access to Stages Link for power meter management and firmware upgrades.
- 2 months free access to Stages Link premium training and coaching features.
- Product Identification Card with Serial Number and ANT+ I.D. Number.
- User Guide
$160.00
$167.00
4% Off
- Di2 internal battery, fits all e-Tube Di2 groups
- Capacity: 500 mAH (± 2000km)
- Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets
- Requires SM-BCR2 charger
$75.99
Shimano BT-R1A External Di2 Battery
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware
- Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems
- Battery weight: 71 grams
$20.00
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.
$110.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want.
- Limitless remote shifting positions for drop and aero bars
- Wired shift buttons can be positioned however the rider prefers
- Connect to Blip Box or drop bar eTap levers
- Compatible with SRAM RED eTap shift/brake controls
$49.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap
$415.00
Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero.
- Replaces standard drop bar shift levers
- Simple and intuitive eTap shift logic
- AXS enabled for easy personalization
- Limitless aero configurations
- Two ports per side for Blips
- Fits the included optional stem mount
- Compatible with existing eTap Blips and Clics
- Mounts inside stem faceplate cap, feed box or frame
$59.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.
- Up to 1000 kilometers of riding per charge
- Weight: 24g
- Finish: Black
- Compatibility: SRAM RED eTap
$20.00
Profile Design's UCM Aerobridge positions your computer between your aero extensions to give you an additional accessory mount. It features adjustable width so you can be sure of a great fit.
$9.99
$10.00
On Sale
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
$10.00
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
$9.99
CPU mount for use with wireless yellow Cervo PowerTap computers.
$20.00
- Machined protective case that houses the Apple AirTag on the bottle cage mount. Apple Air Tag sold separately
- Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant)
- Removal key for T25 bolts security bolts included
- Fits discreetly under a water bottle cage or mounted to accessory top tube bolts
$17.50
- Machined protective case that houses the Apple AirTag under your saddle. Apple AirTag sold separately
- Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant)
- Compatible with some saddle bags
- Mounts to saddle rails
$25.00
- Strong rubber straps securely hold phone
- CNC machined aluminum mount
- Replaceable rubber strap
- Come with 2 sizes of straps to fit most smartphones
$35.00
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20.
- Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system
- Fits 31.8MM Handlebars
- NOT combo compatible
- Weight: 48g
- Anodized Color- Black
$39.99 - $51.00
A lightweight and highly adjustable mount for positioning any Garmin computer on aero bars. The pivoting two piece design offers multiple mounting positions based on aero bars, hydration systems and rider preference.
- For 22.2mm diameter aero bar extensions
- Compatible with all Garmin EDGE computers
- Highly adjustable for multitude of mounting positions
- Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system
- GoPro Interface Compatible
- Weight: 29g
- Anodized Colors: Black, Red, Blue
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
$30.00
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820).
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface
- Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.)
- Made in Boise, Idaho, USA.
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
$8.00
The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break.
- Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503)
- Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
$8.00
Replacement plastic insert kit for K-EDGE Wahoo Mounts.
The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break.
Attributes (specs):
– Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604)
– Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
Page 1 of 9
Next page