Accessories

The Bosch PowerPack 500 is the same size as the PowerPack 400 and only slightly heavier, but offers a longer range. When using the Bosch Standard Charger, this lithium-ion battery requires about two hours to charge to 50% and approximately 4.5 hours to charge fully. Once fully charged and together with the Performance Line Cruise, the eBike can ride up to 56 miles. The PowerPack 500 comes as a frame or rack model for all eBike product lines.

The BackStage is the only swing away platform hitch rack on the market that swings out 180 degrees. No matter if you have a truck, SUV or camper van, this rack is perfect for those who need open access to the back end of their vehicle. Based around the MonoRail platform, the BackStage provides full access to the back of the vehicle, even with bikes loaded. - The industry’s first 180 degree swing away platform hitch rack - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). Not compatible with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Only available for 2" hitches. Utilizes RockyMounts premium 3-axis anti wobble system - Includes locking hitch bolt and cable lock, keyed alike - Not for use with fender equipped bicycles - Rack weight 59 lbs (shipping weight 75 lbs) - For cargo vans like Sprinter, Transit and ProMaster, an 8" Hitch Extension is usually required for handlebars to clear the door. Road/Gravel is usually OK, modern mountain bike bars are too wide and can contact the rear door and the hitch extension is required.

Built to handle heavy loads on backcountry terrain, the OutPost HD truck rack is ready for rugged overland adventures. The mid-height design provides a low center of gravity, easy accessibility to gear, and the perfect platform for the SkyRise Rooftop Tent. Leveraging our new HD Bars for a 500-lb. on-road carrying capacity, and paired with Yakima’s 300-lb. Off-Road Rating, the OutPost HD truck rack is a firmly engineered foundation for a fully loaded overland rack system. Pair the OutPost HD truck rack with the HD Bar length that best fits your bed and gear (HD Crossbars sold separately). Add our SideBar, mounts and accessories, then you’re set to explore the backcountry with confidence. Product Details: - Comes with four towers - Requires Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately) - Fixed mid-height position of 13" provides easy gear access and a low center of gravity - Maximum on-road rating of 500 lbs. - Maximum off-road rating of 300 lbs. - Easy on-off placement in minutes with our patent-pending QuickChange rack attachment - Designed and tested for all common truck beds using our BedGrip clamp design - Additional required kits needed for tracked beds (Track Kit 1) and select tonneau covers (Tonneau Kit 1) - Built to last, with engineered aluminum construction and durable powder-coat finish - Compatible with all Yakima mounts to carry kayaks, surfboards, bikes, rooftop tents and more - Integrated tie-down points make securing any load easy - T-slot attachments make adding gear mounts and accessories fast and simple - Integrated SKS (Same Key System) locks your rack system to the truck bed - Suggested accessories: SideBar, Rotopax Mounting Kit, Recovery Track Mount, Eye Bolts, SkyRise Tent Product Specs: - Weight: 38.50 lbs - Dimensions: L 16.75in x W 5.50in x H 16.50in - Some assembly required, 60 minute install

Looking for a smart, direct-drive trainer? The FLUX S Smart checks all the boxes: it’s reliable, accurate, silent, strong, and features a heavy flywheel for a very realistic ride feel. Made to help you sweat while cycling with your favorite apps, this bike trainer is the ideal indoor training companion. - Measure your power within 3% error tolerance - Next-to-silent direct drive trainer lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 10% gradient and a max sprint resistance of 1,500 watts - Sturdy design easily allows for riding full-out and standing on the pedals FEATURES Type of trainer: Interactive Smart direct drive with electric brake Magnets: 8 Permanent ferrite magnets & 8 electromagnets Transmission: None Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): 2 LEDs Firmware upgradable: Yes Suitable cassettes: Shimano & SRAM: 8 - 11 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available. Suitable bikes: Race, Tri, & MTB Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct-drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software SPECIFICATIONS Max. power (40 km/h): 1500 Watt Max. incline: 10% Simulation of descent: No Max. torque: 22.1 Nm Max. brake force: 65 N Flywheel: 7kg Mass inertia: 22.8kg (50.3 lbs) Calibration: Spin down Footprint (lxw): 670 x 642 mm (26.4 x 25.3 in) Height: 460mm (18.1 in) Weight: 22.8kg (50.3lbs) Article number: T2900S DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <3%

Thule T2 Pro XTR is a premium bike rack for demanding bike enthusiasts. With time-tested durability and award-winning design, this robust bike rack is ready for a wide variety of bike styles, including e-bikes. Hassle-free design Thule T2 Pro XTR has loads of features that make it easy to attach, use, remove, and store. From the tool-free AutoAttach system to the integrated wheels that help maneuver the rack to and from the vehicle, each detail has been carefully engineered, allowing you to focus on getting out and enjoying the ride. Extreme testing At our state-of-the-art Thule Test Center, we put the Thule T2 Pro XTR through the most demanding tests on the market. After using our specially designed test equipment to simulate the rack driving around the world twice, we then expose it to extreme heat, cold, and real-world road tests to ensure we deliver the most durable rack out there. Features: - Versatile design fits nearly all styles of bikes up to 60 lbs with zero frame contact - AutoAttach system makes installation and removal simple and tool-free - Integrated wheels help to maneuver the rack on and off the vehicle - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Fits 20-29" wheels and up to 5" tires without adapters making it ideal for carbon frames, mountain, downhill, or fat bikes - Integrated cable lock and lock knob locks bikes to the rack and secures the rack to the receiver - Generous spacing between bike mounts with the ability to adjust side to side to eliminate bike interference

Thule T2 Pro XTR is a premium bike rack for demanding bike enthusiasts. With time-tested durability and award-winning design, this robust bike rack is ready for a wide variety of bike styles, including e-bikes. Hassle-free design Thule T2 Pro XTR has loads of features that make it easy to attach, use, remove, and store. From the tool-free AutoAttach system to the integrated wheels that help maneuver the rack to and from the vehicle, each detail has been carefully engineered, allowing you to focus on getting out and enjoying the ride. Extreme testing At our state-of-the-art Thule Test Center, we put the Thule T2 Pro XTR through the most demanding tests on the market. After using our specially designed test equipment to simulate the rack driving around the world twice, we then expose it to extreme heat, cold, and real-world road tests to ensure we deliver the most durable rack out there. Features: - Versatile design fits nearly all styles of bikes up to 60 lbs with zero frame contact - AutoAttach system makes installation and removal simple and tool-free - Integrated wheels help to maneuver the rack on and off the vehicle - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Fits 20-29" wheels and up to 5" tires without adapters making it ideal for carbon frames, mountain, downhill, or fat bikes - Integrated cable lock and lock knob locks bikes to the rack and secures the rack to the receiver - Generous spacing between bike mounts with the ability to adjust side to side to eliminate bike interference - Carries up to 4 bikes with Thule T2 Pro XT Add-On (sold separately, 9036XTB, 2" receiver only)

Organize and stow your camp kitchen gear with this all-in-one system, simplifying your effort so it’s always ready to grab-and-go. The rugged, road-worthy box can seamlessly attach to the EXO System for smooth transport to your campsite, trailhead, or ball game. Open it up and turn it into a fully functional work station, making it easy to prep, cook, and serve from the same spot. The system can also be expanded with side-mounted tables and a free-standing Leg kit to grow and customize your EXO OpenRange as needed. PRODUCT DETAILS - Connects to the EXO SwingBase or EXO TopShelf in seconds using the included EXO cleat system - Durable rotomolded enclosure with a rubber door seal keeps your gear fully protected from weather, dust, and critters - Fold down front door allows easy access to your gear and can be used as a prep surface - Internal shelf and integrated utensil drawer help to organize your cooking and camp gear - 85 liters (90 quarts) of internal storage space - Includes SKS locking latches to secure your gear - Tool-free, locking SpeedKnobs attach and lock EXO OpenRange to EXO SwingBase or EXO TopShelf - Includes a lantern hook, backboard organizer and handheld bottle opener - Full suite of accessories available to expand your EXO OpenRange - EXO SwingBase and EXO TopShelf recommended but not required for transport - Made in the USA PRODUCT SPECS - Weight: 37.00 lbs. - Dimensions: L 31.00 in x W 18.00 in x H 18.00 in - Limited Lifetime Warranty

- 250W. - DOES NOT INCLUDE ENERGYPAK PLUS ACCESSORY TO MOUNT ON BIKE. - EnergyPak Plus boosts total capacity by 250Wh. - All the latest EnergyPak technologies combined with an up-to-date design that fits a select number of E-bikes. - Range extender for added mileage. - Smart technology automatically activates at low power. - USB port for charging smart devices. - Anti-theft design. - 20 cells. - Maximum charging current: 6A. - Weight: 1.8kg. - Dimension (L x W x H): 56 x 100 x 88mm.

Surly's Ted Trailer is brilliantly engineered to carry almost everything! This seriously stout workhorse is built from chromoly with stainless-steel hardware for excellent durability and it rolls on quality 16-inch wheels and tires. There are even fenders. The trailer sits perfectly level as you ride, so you can haul longer items that extend off the back. You can tote up to 300 pounds of whatever on this bad boy! So go ahead, run all your errands by bike — you'll be smiling when you get back home. Please note that the required Surly hitch for this trailer is sold separately.

Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

The KICKR CORE is the latest in Wahoo's line of smart indoor bike trainers. It delivers a realistic, accurate, and quiet indoor training experience by using the proven flywheel technology and advanced algorithms of Wahoo's legendary indoor bike trainers. The KICKR CORE indoor trainer is built with the durabilty to withstand all of your indoor training sessions and no other brand of smart trainers has more apps and software training options, including Zwift and Trainer Road. The Core also features built-in cadence measurement, without the need of an external sensor. PLEASE NOTE: Some assembly is required. The KICKR CORE does not include a cassette or wheel block. These items can be purchased separately. - Wahoo's KICKR CLIMB indoor grade simulator was designed in conjunction with the KICKR smart trainers to deliver an unmatched indoor training experience when combined. - KICKR HEADWIND was designed to deliver innovative climate control to your indoor training experience. - The new KICKR features 12x142 and 12x148 thru axle compatibility in addition to standard 130/135mm quick release. Click to find out if your bike is compatible. - Enhanced power accuracy to provide accurate power measurement and generate up to 1800W. - Maximum percent grade adjusts to simulate up to a 16-degree incline. - Visual confirmation that KICKR CORE is powered, connected and transmitting via Bluetooth and/or ANT+. - ANT+ and Bluetooth capabilities allow it to connect to both smartphones and GPS devices simultaneously or separately. An ANT+ FE-C connection allows the KICKR CORE to be controlled from any FE-C enabled device or application. - Robust steel construction ensures the KICKR CORE stays in place while you crank out the watts and stands up to years of heavy use. - When connected to your device, it automatically sets your resistance via your favorite app or software. - The KICKR flywheel is innovative and proven technology emulates the power and inertia experienced during outdoor riding. It provides the most realistic ride feel especially when using virtual riding/training platforms like Zwift and TrainerRoad. - Get these vital cycling metrics on your indoor ride. - Works with popular training apps such as Zwift, The Sufferfest, Fulgaz and TrainerRoad. - Compatible with a third party power meter.

The Elite Direto XR-T is the home trainer you've been seeking for your indoor training this season. This trainer is the biggest evolution of the Elite Direto trainers, featuring an integrated power meter. It is ideal for reaching the highest level of performance and working out in a totally immersive home training experience. - Just like Suito, the Direto XR-T trainer will help you work out on your bike in the easiest and quickest fashion since the first unboxing. - Very stable, Direto XR-T folds quickly for storage when not in use and features a practical integrated handle that makes it easier to carry it with you. - The Direto XR-T is a direct-drive home trainer, meaning that it is one of the quietest home trainers on the market. Integrated power meter - The OTS (Optical Torque Sensor) ensures Direto XR-T the greatest data accuracy while you're training. This is an innovative integrated power meter for the home trainer to measure power output with to within 1.5% error, 0.5% less error tolerant than the original Direto trainer. - The Elite Direto XR-T is the only home trainer in the world, along with the original Drivo, Drivo II, Direto, and Direto X trainers, to actually measure your power output via an integrated power meter. That's why it sets itself apart as one of the most accurate home trainers on the market. Incredible slope simulation - The Direto XR-T is an interactive home trainer, so it automatically varies resistance during your training. With an upgraded and bigger flywheel, the Direto XR-T is able to simulate up to an incredible 24% slope gradient—10% more than what the original Direto could do and 6% more than the Direto X. - This unprecedented power level ensures excellent performances even during particularly intense training sessions—you'll be able the check out all your training charts at a glance, conduct tests to evaluate your fitness level, do reps and high-speed sprints at max power. - Any type of training you want is available to you riding on the Direto XR-T. Super compatible - The Elite Direto XR-T ensures total compatibility with both road and MTB bicycles, making it one of the most compatible trainer on the market. - This trainer features a new structure which is perfect to house derailleurs with long cages that feature greater capacity on bigger 12-speed sprocket sets. This is how the Direto XR-T is compatible with 9/10/11 speed Shimano/SRAM, 9/10/11/12 speed Campagnolo, 12 speed SRAM NX and 12 speed Shimano Micro Spline cassettes. Cassette sold separately. Total Interactivity - Direto XR-T is counted among the new generation of ANT+ FE-C & Bluetooth interactive home trainers that are compatible with any kind of app, software, computer, or device (smartphones and tablets) that support iOS, Android, OSX, or Windows. - Set your course or training programs with a few clicks and start pedaling right away. Direto XR-T will automatically adjust resistance and manage your training session. - Direto XR-T can be managed via the My E-Training software & app (12-month free subscription included) or other indoor cycling services, such as: Zwift, TrainerRoad, The Sufferfest, Bkool, Kinomap and many more.

Transport your rides and save your back, too, with Hollywood's Sport Rider rack that carries up to four bicycles. Simply set any bike into the wheel holders (that are nice and low for easy bike mounting), then slide the padded universal clamp over the frames to secure the bikes. This great rack also includes Hollywood's No-Wobble system that prevents rack sway and holds your bikes steady even when the road is less than ideal. For even more convenience, the Sport Rider is designed as a 2+2, so you can use it as either a 4-bike or 2-bike rack. And, it folds down when not in use for easy transport, storage, and cargo door access. - Capacity: Four Bikes/180 lbs (max. 45 lbs per bike) - Hitch Size: 2-inch only - Not to be used on any trailer, fifth wheel, or towed vehicle

Big dogs like to go along for rides, too! The Bark Ranger™ XL has all the outstanding features of the original Bark Ranger but with an increased weight capacity of 100 pounds and a larger rear tailgate with low clearance for easy loading and unloading. With bigger dogs comes bigger storage needs. Enjoy the exterior cargo area to stash treats and gear for both you and your pal. Or add even more storage with our additional Pet Trailer Pouch and Bark Ranger™ Bag. When you’re pulling the extra weight of a large dog, our integrated parking brake system provides peace of mind with its added stability. With its foldable design, this stroller-bike combo allows for easy storage when your day is done. You'll Love – - 2-in-1 bike trailer and stroller with included 1-Wheel Stroller Kit and adjustable handlebar - Zippered panels roll up to accommodate optimal pet riding positions - Mesh windows offer maximum ventilation - Lower center of gravity provides a smoother ride for you and your pet - Integrated parking brake for added security and stability while stopped - Contains recycled polyester and BLUESIGN® certified sustainable materials Additional Features – - Sturdy, removable floor for easy cleaning - Ability to quickly convert to a kennel for training - Pet-safe interior free of hooks, snags, and sharp edges - Large rear tailgate with low clearance for seamless loading and unloading - Easily folds down for compact storage and transportation - Drum-tight fabric keeps pet secure while riding - Spacious interior for ultimate pet comfort - Push-button wheels for quick removal - Sturdy aluminum frame - Expandable storage options with attachment points for use with the available Pet Trailer Pouch and Bark Ranger™ Bag - Flex Connector allows the bike to lay flat while trailer remains upright

Premium hanging hitch bike rack providing superior bike protection and unobstructed access to the rear of vehicle. Features - Superior bike stability and fit with integrated anti-sway that prevents bike-to-bike contact and "disappears" when not needed - Bikes are safe and secure during transport thanks to 7" of spacing between each bike - Easily fold down bike arms when rack is not in use - Compact cradle design accommodates wide variety of bike sizes/frame styles - Lock bikes to the rack using the integrated cable lock (lock included) - Convenient access to the rear of the vehicle, even with bikes attached, due to the patented swing-away design - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included) - Easily opens and closes with the pull of a pin Technical specifications - Max number of bikes: 4 - Load capacity: 150 lb - Max bike weight: 37.5 lb - Dimensions: 42.2 x 11 x 40.2 in - Folded dimensions: 15.2 x 11 x 40.2 in - Weight: 42 lb - Distance between bikes: 7 in - Carbon frame compatible - Tilt function (with bikes) - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included

A premium aluminum platform bike rack is fully lockable, easy to use, and holds bikes without frame contact. Features: - Quickly attach bikes and easily secure them to the rack using the ratcheting wheel loops - Aluminum construction makes it easy to use, install and remove - Effortlessly fold down bike arms when the rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down, even with bikes on it - Lock bikes to the rack using the integrated cable lock (lock included) - Fits 26"-29" wheel sizes up to a 3" wide tire - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included)

The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes

The Swagman | Quad 2+2 rack provides the versatility to transport 2 bikes or attach the add-on to travel with 4 bikes of up to 45 pounds each. Simple to assemble and easy to use, the padded foam hooks utilize quick-release triggers, ratchet down on the frame, and lock in place for security. - Fits Class 3 2" Hitch Receivers - Fits 20" to 29" wheels - Fits tires up to 3" wide - Carries up to 4 Bikes with a maximum weight capacity of 45lbs per bike - Transforms from 2 bike to 4 bike carrier - Adjustable Locking Ratchet Hooks - Fits most frame sizes, shapes and styles - Step Through/Cruiser Style bikes require the use of a Bar Adapter - Can be folded up when not in use - Locking Threaded Hitch Pin - Rack Weight: 63lbs

No matter how busy you are, hop on Sunlite's F-5 Training Cycle and get a workout regardless of the weather outside. The fully adjustable design means you get a perfect seating position so you can perform at your peak, and the heavy-duty frame keeps flex to a minimum for awesome power transfer. Adjustable resistance allows you to tailor your workout, too, and the side-braking resistance design translates into longer bearing life. You can even track your time, speed, distance, calories, and total distance on the built-in computer. And when it's time to tuck the F-5 away, oversize wheels help you roll it across hardwood floors and even carpet.

- 150lb holding capacity - Includes work tray (#105) (900119-01) - Base not included (900706)

- The PRS-2.3.1 is a professional quality double arm repair stand designed and built to withstand the rigors of everyday shop use. - Includes two 100-3D Micro Adjust Clamps (clamps tubes up to 3", fully adjustable clamping pressure, narrow 2.7" clamping jaws) - Clamps two bikes simultaneously - Clamps rotate 360 degrees horizontally and vertically - Heavy gauge, chrome plated steel tubing for rigidity and years of trouble free use - Clamping height easily adjusts from 50" to 62" (128cm to 158cm) using heavy duty lock block and locking pin system - Includes aluminum work tray - #135 Steel Base Plate sold separately - Use FP-2 Floor Mounting Plate to mount stand directly to floor (sold separately)

Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 328g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Drawing inspiration from Pedro's Bench In a Box and Master Tool Kit, this extensive tool set includes 55 professional-quality tools packaged simply to ensure the best possible value. You won’t find a glorified fishing tackle box, but instead a wide variety of professional tools ready to tackle installations, overhauls, and repairs. The perfect kit for new shop mechanics or home enthusiasts. Includes: - L Hex Wrench Set - 9 piece - 6mm and 8mm Hex Driver - Y Wrenches - 2, 2.5, 3, 4, 5, 6 hex, T10, T25, T30 torx - L Torx Set - 7 piece - Tire Levers – Yellow (2) - Pro Chain Tool 2.0 - Equalizer Pedal Wrench - Vise Whip - Cassette Lockring Socket - Campy BB & Cassette Socket - Splined Bottom Bracket Socket - Freewheel Socket - Bottom Bracket Wrench - Cable Cutter - Cable Puller - Universal Crank Remover w/ Handle - Phillips #2 Screwdriver - Flat Blade 5.5 Screwdriver - Star Nut Setter - 1" & 1 1/8" - Magnetic Parts Tray - 13mm, 14mm, 15mm, 16mm Cone Wrench (2 Pieces Each) - 17mm, 18mm, 19mm Cone Wrench - Tape Measure - Pro Spoke Wrench - Black - Pro Spoke Wrench - Green - Pro Spoke Wrench - Red - Chain Checker Plus - Adjustable Wrench-10

Transport all types of bikes with Saris’ Freedom 4-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright supports. It uses quick-adjust trays and ratcheting straps to secure four bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright supports even tilt down to allow trunk access.

- SnugTite Stinger positions the rack securely into the hitch receiver - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Ratcheting arm and wheel tray secure bikes quickly without frame contact - Easily adjustable trays move side to side to create generous spacing between the bikes - Tool-free AutoAttach system makes it easy to install and remove the bike rack - Fits carbon frames, mountain bike, downhill bikes, 20—29" wheels, and up to 3" tires without adapters. Fat bike adapter kit sold seperately - Includes the Thule One Key System to lock the rack to the vehicle - Maximum bike weight is 50 lbs / 23kg per bike

Now the family bikes can ride in style. The FullSwing has all the bells and whistles, from new ZipStrips to fully padded arms. It also swings away with one touch, for easy access to your car whenever you need. Holds up to four bikes. - Swings away from car with bikes loaded to provide easy access to rear of vehicle - Quick and easy assembly - Tool-free installation with locking SpeedKnob - AutoPin automatically positions and secures rack to the hitch and receiver - Zero-hassle ZipStrips quickly secure bike to rack - Fully padded arms for the ultimate in bike protection - Arms fold down when not in use - SKS Locks included; locks racks and bikes - Carries up to 4 bikes - 4 bikes. Total weight, 150 lbs. Maximum bike weight 40 lbs each. - Available: TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. Product Specs: - Weight: 56.00 lbs. - Dimensions: L 43.50 in x W 26.00 in x H 17.50 in - Limited Lifetime Warranty

Perfect for tour operators, group rides and big families. Constructed of heavy-duty steel, our first-ever vertical bike rack safely hauls up to four mountain bikes to the trailhead. We designed and tested it in the lab and on the road to meet our demanding Yakima standards. The easy-to-operate tilt mechanism with two adjustable mast angles keep your bikes from bumping into your car, truck or SUV and makes accessing the tailgate a breeze. The HangOver’s vertical orientation carries more bikes in less space. Get ready to session! Product Details: - Transports up to 4 bikes using minimal space 37.5 lbs max per bike - Foot-operated tilt mechanism changes rack position for easy loading and unloading - Tilts down and out of the way for easy rear-of-vehicle access - Securely supports bikes by the fork crown - Fits suspension-fork bikes only - Fits fat bike suspension forks - Soft padding protects the fork’s finish - Rotating wheel cup accommodates bikes with various wheelbases - 2 mast height positions for improved ground clearance and ease of loading - 2 mast angles to avoid bike-tire contact with your vehicle - HitchLock included - Built-in bottle opener, cheers! - Fits 2" hitch receivers only - Compatible with the sold separately BackSwing - Add your own bike lock to the integrated lock loop for greater bike security Product Specs: - Weight: 65.00 lbs - Dimensions: L 22.00in x W 46.00in x H 60.00in - Some assembly required, 10 minute install - 2" hitch receiver required

Enjoy the ultimate advantage of freedom and adventure that Eagle provides combined with the Quarq power meter platform that delivers on accuracy and reliability. The SRAM Eagle XX1 power meter is built to pair with the SRAM Eagle drivetrains, providing a significantly quieter performance and extraordinary durability. Take it on the dirtiest, gnarliest trails while maintaining confidence in your cycling components. You came to perform; the Eagle XX1 power meter will perform with you. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather or trail condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh environments do not hold you back, then you need a product capable of rising to the occasion. The Eagle XX1 power meter is designed to be rough-and-tumble tough. Train harder, ride faster and unlock your ultimate potential. The Eagle XX1 power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. The Eagle XX1 also features Bluetooth low energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Bolt Circle Diameter (BCD): 104 BCD - Chainline: 52.0mm - BB Spindle Interface: DUB - Power Meter Type: ANT+ and BLE - Crank Arms/Chainrings not included

The XX Eagle T-Type AXS™ Wide left crankarm with Power Meter spindle utilizes SRAM's World stage proven XX crank arm with a subtly integrated power meter to record and deliver live, accurate power readings to your head unit. We achieve this by utilizing what SRAM calls “DUB-PWR” – a unique design that elegantly houses Quarq’s reliable and accurate power measurement inside the DUB crank spindle itself. Measuring left-side power to calculate total watts, it’s subtle, lightweight, compatible with any chainring setup, and boasts unbeatable battery life. It is also compatible with the Flight Attendant system, allowing for total connectivity between all AXS™ enabled components. No-compromise, no-fuss data delivery giving you an edge over the competition. - Innovative "DUB-PWR" design allows for lightweight, subtle Quarq power integration - Compatible with RockShox Flight Attendant - +/-3% accuracy means you'll always know your true watts output - Long battery life provides 400+ hours of usage - Waterproof (IPX7 waterproof to 1 meter for 30 minutes - Right arm, Bottom bracket, Chainring and Spider NOT included

Built to withstand the rigors of every day shop use, the PRS-3.3 is the stand of choice for professional mechanics around the world. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use. The PRS-3.3-2 features our 100-3D Micro-Adjust Clamp with narrow clamping jaws and a dual-stage, cam-actuated system that quickly adjusts to accommodate nearly any seat tube or frame size. - Maximum weight capacity: 120 lbs. (54 kg) - Clamp capacity: 0.875" to 3" (22–76 mm) diameter tubes, including aero tubes - Clamp jaws are nominally 2.75" (70 mm) wide - Clamp height: adjustable from 50" to 62" (128–158 cm) - Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector - Can be installed onto the #130 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)

Park Tool's Bottom Bracket Tapping & Facing Set is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell. The BTS-1 includes English taps, 1.370" x 24 TPI right hand thread for the adjustable cup, and 1.370" x 24 TPI left hand thread for the fixed cup. Italian thread taps, 36mm x 24 TPI right hand thread (Part #693) for the adjustable and fixed cups, are available as accessories.

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon and built to retrofit SRAM (road and mountain), Race Face, and Easton cranks with Stages Power, with added spindle purchase. No additional spindle purchase required for FSA 386EVO cranks. This one Stages Power meter is built to rule them all—all of the most popular 30mm spindled crank sets, that is. Interchangeable 30mm spindles bring Stages Power carbon to numerous popular crank sets. In order to fit a vast array BB30 based crank sets—including, SRAM, RaceFace, and Easton, as well as FSA’s 386EVO —Stages' engineers have developed a range of bottom bracket spindles that serve to mate our super-light carbon Stages Power meter to more than 10 different 30mm spindled crank sets. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

Train brilliantly with Forerunner® 965, the premium GPS running and triathlon smartwatch with a bright AMOLED touchscreen display and lightweight titanium bezel. Wake up to your morning report with HRV status to see health insights with an overview of sleep, recovery and training outlook (data presented is intended to be a close estimation of metrics tracked). The training readiness feature tells you when you’re primed for a productive session — while daily suggested workouts adapt to performance and recovery alongside the race widget, which provides training tips, course details and completion time predictions. Navigate any route confidently with multi-band GPS and full-color, built-in maps. With traditional buttons and a touchscreen display, it’s easy to tap into your training status and know whether you’re training productively, peaking or strained. If you’re pushing to outshine the competition, the Forerunner 965 is there to light up every run with up to 23 days of battery life in smartwatch mode.

It’s the ultimate in integrated power measurement. The Force AXS power meter kit adds Quarq technology to our one-piece chainrings for the lightest, stiffest, and most accurate power package available. A 13-tooth delta on all chainring pairs ensures precise shifting for any setup, as well as a less dramatic change in cadence during front shifts. Combined with our most durable chainrings ever, it’s an unbeatable combination. FEATURES - X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren’t affected by climate conditions during a ride - Measures right and left leg power balance - Crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable unit

- Capacity: Two Bikes (Max. 80 lbs per bike) - Hitch Size: 2" only (Do not use a 1-1/4" -2" hitch adapter) - Maximum bike wheelbase: 60" - Maximum tire width: 5" - Features extra heavy duty wheel holders, an internally reinforced frame and external brace for heavy load carrying capacity - Includes keyed alike locking hitch pin, 8' security cable and locking frame grabbers - For 20" Fat tire rear wheels you will need a Small Wheel Adapter (SW-ADP-U) to prevent derailleur hanger interference (You will only need one per bike) - Not intended for use with motorized gasoline bicycles, mopeds, motorcycles or 3 wheel bikes (trikes), or electric scooters - Rack Weight: 63.5 lb - Limited Lifetime Warranty

The latest innovation from Wahoo will literally take your indoor training to the next level! KICKR CLIMB indoor grade simulator is designed to work exclusively with the Wahoo KICKR Smart Trainers and when paired, it will add physical grade changes to your indoor training. The KICKR CLIMB is compatible with Third Party Apps, so whether riding a virtual course or performing a structured workout, KICKR CLIMB blends ascents and descents with resistance changes for a truly immersive indoor training experience. The world isn’t flat; now, neither is your ride! Features - Real-time grade changes - App controlled - 20% maximum incline - -10% maximum decline - KICKR smart trainer compatible - KICKR desk compatible - Wahoo ELEMNT bike computer compatible - Direct proximity pairing - Locked and unlocked climbing modes - Manual grade adjustments with remote control - Quick release and thru-axle bike compatibility - LED indicator lights - Professional grade durability - Third party app compatibility

The Bark Ranger™ pet bike trailer and stroller is ready to go anywhere, anytime—just like your favorite four-legged friend. Designed for ultimate pet comfort, this dog stroller and bike trailer combo offers a roomy interior, exterior pockets to store leashes and treats, mesh windows for breezy ventilation, and a large rear tailgate with low clearance for easy loading and unloading. For additional pet comfort, add our plush Pet Bed insert for some serious R&R on the go. Equipped with multiple roll-up zippered panels and an integrated parking brake for stability, you'll feel at ease knowing your best pal is fully secured. The Bark Ranger holds pets up to 75 pounds and allows you to pack for a full day of adventures with the additional storage options of the Pet Trailer Pouch and Bark Ranger™ Bag. When your outing is done, remove the trailer floor for easy clean up, or fold the Bark Ranger down for compact storage until your next adventure. You'll Love – - 2-in-1 bike trailer and stroller with included 1-Wheel Stroller Kit and adjustable handlebar - Zippered panels roll up to accommodate optimal pet riding positions - Mesh windows offer maximum ventilation - Lower center of gravity provides a smoother ride for you and your pet - Integrated parking brake for added security and stability while stopped - Contains recycled polyester and BLUESIGN® certified sustainable materials Additional Features – - Sturdy, removable floor for easy cleaning - Ability to quickly convert to a kennel for training - Pet-safe interior free of hooks, snags, and sharp edges - Large rear tailgate with low clearance for seamless loading and unloading - Easily folds down for compact storage and transportation - Drum-tight fabric keeps pet secure while riding - Spacious interior for ultimate pet comfort - Push-button wheels for quick removal - Sturdy aluminum frame - Expandable storage options with attachment points for use with the available Pet Trailer Pouch and Bark Ranger™ Bag - Flex Connector allows the bike to lay flat while trailer remains upright

The deep muscle treatment pros trust with the durability and features they rely on. Enhance muscle recovery, release stress and tension, and soothe discomfort with the smart percussive therapy device in a league of its own.

Fast, secure, and easy to use, the HoldUp EVO is built to handle new bike standards, like fat tires and boost hubs, but it easily carries the classics too. The StrongArm hook secures the bikes at their wheels, protecting carbon frames and painted surfaces. Tilt the rack with bikes loaded for quick rear-of-vehicle access using the new easy-to-reach tilt lever and KickStart foot pedal. The super-simple locking SpeedKnob makes install a tool-free breeze and included SKS bike locks keep your mind at ease. - Hitch-mounted tray rack that loads quickly and carries two bikes without frame contact - Easy-access tilt mechanism and KickStart foot pedal make raising and lowering the rack a breeze, even with bikes loaded - Tool-free locking SpeedKnob makes installation and removal fast, easy and secure - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Easily adjust trays to reduce bike-to-bike interference - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes, & E-bikes under 50 lbs. - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - Accommodates bike wheelbases up to 48" - Integrated SKS (Same Key System) locks included for added bike security - Carry four bikes – just add the HoldUp EVO +2

Yakima's caged beast offers monstrous carrying capacity. The MegaWarrior is a perfect fit for mid- to full-size sport-utility vehicles and it's made of heavy-duty steel. You can easily attach bike mounts directly with its movable accessory bar and a custom fairing is included to cut wind noise and protect your cargo. The MegaWarrior's universal mounting hardware fits round and square crossbars, plus many factory racks, too.

When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes

When your solo ride turns into a weekend expedition with friends, the NV Base 2.0 Add-On lets you increase the NV Base 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium matte powder coat - Compatible with 2-inch NV Base 2.0 - Increases 2-inch NV 2.0 carrying capacity to 4 bicycles weighing up to 40 pounds each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Quick change from 2 to 4 bikes

- Powder-coated alloy frame - 600D polyester material w/roll-up weather window - 2-child adjustable seat - Quick-release axle mount system - Quick-release 20-inch alloy wheels - Easy folding for transport - Quick-release wheel guards - Two-piece safety flag and reflectors included - Max load: 100lbs - Length 53.1-inch x Width 32.25-inch x Height 33.9-inch (including bar) - 23 lbs

With its robust construction, eye-catching style and compact design that carries both bikes on a single bar, the SuperClamp is your bike’s new BFF. This lightweight – yet mighty – platform hitch rack is ready to hit the road at a moment’s notice. Whether you’re hauling eBikes, beefy mountain bikes, your prized TT rig, or an assortment of bicycles, the SuperClamp’s dual shepherd’s hooks promise all bikes a truly secure ride without touching the bike’s frame. And thanks to the SuperClamp’s tilting feature, no more unloading bikes to let the dog out of the back. Simply tilt down and release the hounds. Top it all off with integrated locks, a built-in bottle opener and head-turning reflectors, the SuperClamp 2-bike is proof that you can have your cake and eat it too. - Fastest loading bike rack around thanks to the dual wheel-clamping hooks (bonus: no frame contact). - Lightweight, yet mighty! Weighs only 35 lb, and is rugged enough to carry 2 bikes, up to 60 lb each. - Features integrated locks and reflectors for extra security and visibility, day and night. - Open Sesame! Tilting feature allows hatch access, even when fully loaded, and folds up when not in use. - Sleek and compact design holds 2 bikes on a single bar.

Updated to fit an even wider range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accurately self-center nearly any diameter wheel 16-inch to 29+ and any tire width up to 5-inches+. - Both uprights move simultaneously to always keep wheel centered in the stand - Accommodates tire widths up to 5-inches+ with or without brake rotor mounted - Speed knob to quickly change axle widths - Accommodates hub widths from 75mm to over 250mm - Precise operation and adjustability - Built in thru-axle adaptors - Machined, welded, assembled and calibrated in our factory in St. Paul, MN - Chrome plated and powder coated heavy gauge steel construction - Removable, replaceable nylon caliper tips to protect painted/anodized rims

The HighNoon FC is the first and only rack in the RockyMounts' family that supports use of bikes with fenders. The rack includes an upswept base allowing for better departure angle, as well as a tiered platform for handlebar clearance. The dual strap system allows for secure transport for bikes with and without fenders. - Compatible with bikes with fenders - Compatible with bikes without fenders - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). 2" variant is expandable to 3 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0" fat bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 36" to 50" - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and the adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Rack weight 39 lbs (shipping weight 49 lbs) - Fit Memo- For cargo vans (vehicles with flat backs), Depending on hitch placement, handlebar width, an 8" Hitch Extension may be required for wide mountain bike handlebars to clear the doors.

Enjoy quality time with your little ones or haul around groceries with Sunlite's Hard Shell Deluxe Trailer Tot. Its protective steel frame is covered with 600D polyester and comfortably fits two children. It also converts to a cargo trailer with side rails. If the weather turns sour, the trailer's canopy keeps your children dry and reflective accents enhance visibility. The Deluxe Trailer Tot easily connects to your bike's axle and its quick-release 20-inch aluminum wheels roll smoothly along the pavement behind you.

SUITO-T is the Elite Suito home trainer without supplied sprocket cassette, a powerful and compact model that offers total compatibility with several types of bicycle. Powerful, solid, and quiet, SUITO-T is an interactive home trainer designed to offer a realistic, accurate, and fun bicycle workout experience. Featuring direct transmission to ensure increased accuracy and quietness while working out, the SUITO-T is very stable trainer even during the most intense sprints, and its small size makes it easy to transport and store everywhere. What's the difference between a Suito and a Suito-T? - SUITO and SUITO-T are two identical home trainers, featuring the same technical specifications both in terms of structural and electronic features. - What separates them is the sprocket cassette, which is included in the Suito but not included in the SUITO-T. Compact design - The main feature of this home trainer is the sturdy steel structure, ideal to ensure durability and stability even during intense sprints. - Featuring an elegant and solid profile, SUITO-T has a wide support base with pre-assembled support legs. Just position them properly to trigger the automatic lock mechanism. - SUITO-T is designed to ensure a small footprint wherever you go: its integrated handle, reduced size, and slim profile makes it easy to transport and store everywhere without worrying about its footprint. - SUITO-T optimized design makes it compatible with various bicycle models and commercially available sprocket sets. Accurate and powerful bicycle workouts - SUITO-T simulates gradients up to 15% with ± 2.5% accuracy, one of the most powerful home trainers you can use to release all your power even during the most intense sprints. The following functions also contribute in displaying accurate workout data: - Power Meter Link (PML): It's a function that lets the home trainer employ an ergometer that's already installed on your bike as a power source. - Spindown: A calibration procedure for the home trainer that takes into account all friction values that change over time and during use that influence brake's accuracy and compensates its effects on the resistance generated by the home trainer. - Temperature compensation algorithm: A function that lets the home trainer compensate the variations due to brake overheating and take the resulting data into account when calculating power. Train on Zwift and My E-Training! - Discover all the software you can use with SUITO-T: other than Zwift and My E-Training, you can also manage it with all other indoor cycling platforms such as TrainerRoad, Kinomap, Rouvy, Bkool, Bikevo and many more. - SUITO-T adds up to the Elite home trainers' range of ANT+ FE-C & Bluetooth home trainers that interact with every app, software, computer and device (smartphones and tablets) via iOS, Android, MacOS and Windows. Just choose the software, select the course or training program and start pedaling on your bike. SUITO-T will automatically adjust resistance. Sensorless cadence - All home trainers by Elite immediately send power, speed, and cadence data, thus setting themselves as effective instruments to build an accurate training program and replicated outdoor workouts as much as possible. Cadence is measured via a practical sensorless technology (that is, no sensors to apply to your bicycle) and is calculated on the SUITO-T as a function of speed variations.

- Bring it all - Designed for full full-size and compact pickup trucks, this bed level truck rack is perfect for carrying a rooftop tent, basket and other equipment up to 220lbs. - Includes two crossbars and four mounting feet - Made from durable, corrosion corrosion-resistant aluminum for years of use - Includes the Thule OneKey system to lock the truck rack to the truck bed - 2 sizes available: Full Full-Size & Compact

- Bring it all - Designed for full full-size and compact pickup trucks, this bed level truck rack is perfect for carrying a rooftop tent, basket and other equipment up to 220lbs. - Includes two crossbars and four mounting feet - Made from durable, corrosion corrosion-resistant aluminum for years of use - Includes the Thule OneKey system to lock the truck rack to the truck bed - 2 sizes available: Full Full-Size & Compact

The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price. - Flatlock cam for 2", ball cam for 1.25" - Includes semi-integrated bicycle cable lock - Tamper-resistant hitch security - More robust hitch design for enhanced stability in tow - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes - Automotive-grade 750 hour salt spray hardware - Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.

Built to withstand the punishment of travel and constant use and molded from impact resistant polypropylene, the BX-3 features pallets with 70% more surface area than the BX-2.2. Easily transportable with the integrated wheels and extendable handle, this case was designed with the help of some of the world's best mechanics for optimal form, function and longevity. - Smooth rolling integrated wheels - Extendable handle - Dust and water resistant - Air pressure compensation valve - Custom designed tool-holding pallets with loops and pockets - Gas assisted lid struts for easy opening - Dual-sided upper and mid level folding pallet wings - Front tool pallet that stores safely inside during transport - Nominal dimensions: 23.4" x 17.3" x 9.3" (59.5 cm x 44 cm x 23.5 cm), 21.6 lbs. (9.8 kg)

The EXO GearLocker gives you the functionality of a legendary Yakima roof-top cargo box with hitch-mounted ease-of-access. Easy on-and-off makes it perfect for hauling gear from your car to the campsite, the beach, or anywhere else you need your gear on-hand. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system? - 10 Cubic Feet of Storage Space - Wide-angle opening makes placing or finding your gear easy - Rugged and lightweight - Tool-free, locking SpeedKnobs attach and lock EXO GearLocker to EXO SwingBase or EXO TopShelf - SKS Lock included for added gear security - No assembly required - 100lb gear weight limit when mounted on EXO SwingBase - 80lb gear weight limit when mounted on EXO TopShelf - 2 Year Warranty - Made in the USA - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 27.80 lbs. - Dimensions: L 60.00 in x W 23.00 in x H 16.00 in - Limited Lifetime Warranty

Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. Includes: • 30.1 mm reamer (part #751.2) and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1 as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC30. Accessories will allow service in other standards.

Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard. Includes: • 33.9mm reamer (part #754.2), and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 Facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1B as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC34. Accessories will allow service in other standards.

- Capacity: Two Bikes (Max. 80 lb per bike) - Hitch Size: 2" only (Do not use a 1-1/4" -2" hitch adapter) - Maximum bike wheelbase: 60" - Maximum tire width: 5" - Features extra heavy duty wheel holders, an internally reinforced frame and external brace for heavy load carrying capacity - Includes keyed alike locking hitch pin, 8' security cable and locking frame hooks - Patented "No-Wobble Hitch System" eliminates slack between the receiver and the rack without the use of tools - Folds flat against car when not in use - Tilts down for easy cargo door access - Space between bikes: 10 - For 20" Fat tire rear wheels you will need a Small Wheel Adapter (SW-ADP-U) to prevent derailleur hanger interference (You will only need one per bike) - For step through bicycles you will need to also purchase a Bike Adapter - Rack Weight: 58 lb - Limited Lifetime Warranty - Not to be used on any trailer, fifth wheel or towed vehicle

Redesigned! We've made the base stronger for better stability. One-size-fits-all conical thru-axle adapters are now included with the stand, and are held in place by magnets when not in use. The arms have been made longer to accommodate 29+ wheels better and the calipers widened accordingly. Threads, springs and bearings were all revised resulting in smoother operation plus less frequent calibration. Additionally, we include white high-gloss stickers you can apply to the base and caliper arm to improve background contrast, making it easier than ever to use. -Stronger base for improved precision -Longer and redesigned upright arms for improved clearance of 29+ wheels -Wider calipers for increased clearance of 29+ wheels -Accommodates wider axles, works with through axle hubs up to 197mm width (include the use of adapters). Max. arm opening 230mm (without the use of adapters). -New bearings on the upright arm adjust axle are spring loaded for improved precision and reduced frequency of calibration -Redesigned caliper tips for easier radial truing -Revised threads and springs for smoother operation -8mm bench mount holes at the bottom, 268 mm center to center -Slicker design, all black. Includes white high gloss stickers, covering the base and caliper arm, for improved background contrast (stickers are not preapplied) -Comes with conical magnetic through axle adapters – one size fits all (12, 15 and 20). The adapters are now magnetic and can be affixed anywhere on the base. Features a bolt for more permanent fix on the upright arms. Compatibility: -Accepts wheels from 16 to 29+ inch with or without tire. Supports solid, quick release and through axle hubs -Accepts hubs up to 197mm when using our thru axle adapters, 230mm without. -Through axle hubs are supported with use of the adapters (included) -One pair of through axle adapters support all sizes of through axles

The flexible design fits more bikes than any other hitch rack in its price range. - Fits nearly all bike styles including 16-29" wheels, up to 5" wide tires, and wheelbases up to 52" right out of the box - Adjusting, installing and removing requires minimal effort, as it is one of the lightest platform hitch racks on the market at only 37.5 lbs - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Lock the bikes to the rack and the rack to the receiver keeping everything safe during transport or when parked - Easily transfers between 1.25" and 2" hitch receivers

This add-on to Thule's premium T2 Pro XT platform hitch rack allows 4 bike capacity (2"/50mm receivers only). - Lock bikes to the rack with the integrated cable lock - Eliminate bike interference by adjusting side to side to create generous spacing between bike mounts - Secure bikes quickly without frame contact with the frame free ratcheting arm - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters

The two-bike EXO DoubleUp attaches directly to the EXO SwingBase, or to the second tier EXO TopShelf, allowing room for an EXO GearLocker or EXO GearWarrior below. Either way, it's super-easy access that accommodates anything you're riding—fat tires to road bikes and everything in between. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - Carries 2 bikes up to 50 lbs. each when mounted on EXO SwingBase - Carries 2 bikes up to 40 lbs. each when mounted on EXO TopShelf - Tool-free, locking SpeedKnobs attach and lock EXO DoubleUp to EXO SwingBase or TopShelf - Use SKS Lock cores included with EXO SwingBase or EXO TopShelf for added bike security - Limited Lifetime Warranty - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 37.15 lbs. - Dimensions: L 26.60 in x W 72.00 in x H 7.00 in - Limited Lifetime Warranty